Journal of Structural Engineering: Recent submissions
Now showing items 2881-2900 of 10765
-
Experimental Study of In-Plane Shear Behavior of Fiber-Reinforced Concrete Composite Slabs
(American Society of Civil Engineers, 2016)This study investigates the in-plane shear behavior of composite slabs reinforced with different types of secondary reinforcements. Experimental results of 20 large-scale composite slabs constructed with two different deck ... -
Comparison and Implementation of Multiple Model Structural Identification Methods
(American Society of Civil Engineers, 2015)Although multiple-model structural identification (MM ST-ID) approaches appear to offer clear, conceptual benefits over single-model approaches, they have not yet been employed within a transparent scenario that will allow ... -
Seismic Response of Masonry Arches Reinforced by Tie-Rods: Static Tests on a Scale Model
(American Society of Civil Engineers, 2015)This article presents an experimental study on the seismic behavior of arch-pier systems reinforced with tie-rods. In particular, the role of the tie-rod stiffness is stressed, with the aim of proposing innovative tie-rods ... -
Simplified Approaches to Design Medium-Rise Unbraced Steel Storage Pallet Racks. I: Elastic Buckling Analysis
(American Society of Civil Engineers, 2015)The design of steel storage pallet racks is quite complex, despite the fact that these structures are built with economical components and manufactured from thin coils or sheets. The most advanced approaches for rack design ... -
In-Plane Behavior of Timber Frames with Masonry Infills under Static Cyclic Loading
(American Society of Civil Engineers, 2016)The good in-plane behavior of timber frames with masonry infills, characterized by an excellent ductility capacity, is presented and explained as observed during static cyclic experimental tests on wall panels. The aim of ... -
Nonshear Deformable Theory for Analysis of Steel Beams Reinforced with GFRP Plate Closed-Form Solution
(American Society of Civil Engineers, 2015)The present study complements recent published work by developing a general closed-form solution for the analysis of steel beams reinforced with glass-fiber-reinforced plastic (GFRP) plates under general loading and boundary ... -
Behavior of Cold-Formed Steel Built-Up Sections with Intermediate Stiffeners under Bending. I: Tests and Numerical Validation
(American Society of Civil Engineers, 2016)An experimental investigation of simply supported built-up section beams with different sectional configurations has been conducted under both four-point bending and three-point bending. Intermediate stiffeners were employed ... -
Deformed Shape Wind Analysis of Tensile Membrane Structures
(American Society of Civil Engineers, 2016)Conventionally, the pressure coefficients of tensile membrane structures are determined in wind tunnels on rigid models and the effect of the typically large deformations of the membranes on the pressure coefficients is ... -
Stability Analysis and Design of Composite Structures
(American Society of Civil Engineers, 2016)The direct analysis method is the primary means of assessing system stability within a standard specification. This method, and in particular its use of reduced stiffness, has been thoroughly validated for use in frames ... -
Behavior of Cold-Formed Steel Built-Up Sections with Intermediate Stiffeners under Bending. II: Parametric Study and Design
(American Society of Civil Engineers, 2016)Built-up sections were used in a wide range of constructional steel applications. The investigation aims to develop suitable design rules for cold-formed steel doubly symmetric built-up open and closed sections with ... -
Seismic Analysis of Cross-Laminated Multistory Timber Buildings Using Code-Prescribed Methods: Influence of Panel Size, Connection Ductility, and Schematization
(American Society of Civil Engineers, 2016)This paper investigates the seismic analysis of multistory cross-laminated timber (XLAM) buildings. The influence of different parameters such as wall geometry, vertical load level, friction, and, most importantly, connection ... -
Compressive Behavior of Gusset Plates Connected with Single-Angle Members
(American Society of Civil Engineers, 2016)Gusset plate connections with single-angle steel members are commonly used in power transmission towers. However, little research has been carried out with regard to the compressive behavior and design of gusset plates ... -
Global Size Optimization of Statically Determinate Trusses Considering Displacement, Member, and Joint Constraints
(American Society of Civil Engineers, 2016)Realistic truss design optimization problems are often governed by practical constraints. Because of the complexity of these constraints, usually only member constraints are taken into account during the optimization, and ... -
Probabilistic Approach for Estimating Plastic Hinge Length of Reinforced Concrete Columns
(American Society of Civil Engineers, 2016)Given the importance of the plastic hinge length in predicting the displacement ductility of reinforced concrete (RC) structures, it is crucial to be able to accurately determine it without a large scatter. However, given ... -
Stochastic Nonlinear Behavior of Reinforced Concrete Frames. II: Numerical Simulation
(American Society of Civil Engineers, 2016)Experimental investigations on the stochastic nonlinear behavior of eight half-scale reinforced concrete (RC) frames with the same conditions in the companion paper indicates that the coupling effect between randomness and ... -
Stochastic Nonlinear Behavior of Reinforced Concrete Frames. I: Experimental Investigation
(American Society of Civil Engineers, 2016)This paper reports a systematic experimental investigation into the stochastic nonlinearities inherent in reinforced concrete (RC) frames. A series of specimen tests is conducted with a static monotonic lateral loading ... -
Fatigue Reliability Assessment of Railway Bridges Based on Probabilistic Dynamic Analysis of a Coupled Train-Bridge System
(American Society of Civil Engineers, 2016)This paper presents an approach to fatigue reliability assessment of railway bridges based on probabilistic dynamic analysis of a coupled train-bridge system. The fatigue loading from moving trains is investigated through ... -
Behavior of Concrete-Encased CFST Members under Axial Tension
(American Society of Civil Engineers, 2016)This paper studies the behavior of concrete-encased concrete-filled steel tube (CFST) members under axial tension. Experimental results of thirteen specimens were reported. The variables in the test were the diameter of ... -
Efficient Resilience Assessment Framework for Electric Power Systems Affected by Hurricane Events
(American Society of Civil Engineers, 2016)Ensuring electric power system resilience against natural and anthropogenic hazards is vital for public health, economy, security, and well-being across modern societies. This paper presents a resilience assessment framework ... -
Triangular Shell Heat Transfer Element for the Thermal Analysis of Nonuniformly Heated Structures
(American Society of Civil Engineers, 2016)This paper presents a triangular shell heat transfer element that is used to simulate the thermal response of nonuniformly heated structures. The formulation uses a combination of finite-element and control volume techniques ...