Journal of Structural Engineering: Recent submissions
Now showing items 2841-2860 of 10765
-
Load Height and Moment Factors for Doubly Symmetric Wide Flange Beams
(American Society of Civil Engineers, 2015)An analytical procedure is used to study the effects of moment gradient and load height on the elastic stability of wide flange steel beams. Lateral torsional buckling is the limit state considered. Solutions are developed ... -
New Model for Estimating the Time-Variant Seismic Performance of Corroding RC Bridge Columns
(American Society of Civil Engineers, 2015)Corrosion of reinforcement is a predominant reason for reduced service lives of reinforced concrete (RC) structures exposed to aggressive environments. This deterioration process can lead to damage resulting in capacity ... -
An Engineering Application of Earthquake Early Warning: ePAD-Based Decision Framework for Elevator Control
(American Society of Civil Engineers, 2016)In a medium-to-large earthquake, there are often reports of people being trapped or injured in elevators. This study investigates using an earthquake early warning (EEW) system, which provides seconds to tens of seconds ... -
Joint Modeling of the Parent Population and Extreme Value Distributions of the Mean Wind Velocity
(American Society of Civil Engineers, 2016)The analysis of wind actions and effects on structures involves the knowledge of the parent population and extreme value distributions of the mean wind velocity. In spite of an impressive amount of measurements, refined ... -
Simplified Vibration Serviceability Evaluation of Slender Monumental Stairs
(American Society of Civil Engineers, 2015)Slender monumental stairs are major architectural features in many high-end building structures. Architectural requirements for these are usually very aggressive, with long spans and slender stringers being the norm. The ... -
Displacement-Based Compatibility Strut-and-Tie Method and Application to Monotonic and Cyclic Loading
(American Society of Civil Engineers, 2016)The -
Effect of Environmental Aging on the Numerical Response of FRP-Strengthened Masonry Walls
(American Society of Civil Engineers, 2016)Recent durability studies have shown the susceptibility of bond in fiber-reinforced polymer (FRP) strengthened masonry components to hygrothermal exposures. However, it is not clear how this local material degradation ... -
Performance-Based Comparison of Different Storm Mitigation Techniques for Residential Buildings
(American Society of Civil Engineers, 2016)In recent years, severe hurricanes have caused enormous economic losses for society and placed tremendous burden on the insurance industry. As the number of residential buildings in hurricane prone regions continues to ... -
Strong-Axis Stability of Wide Flange Steel Columns in the Presence of Weak-Axis Flexure
(American Society of Civil Engineers, 2016)Column stability during seismic events is a critical consideration for all steel-framed structures, but is of particular importance for a unique class of steel frames called multitiered braced frames (MT-BFs). A MT-BF is ... -
Real-Time Output-Only Identification of Time-Varying Cable Tension from Accelerations via Complexity Pursuit
(American Society of Civil Engineers, 2016)In-service cables of structures, such as those in cable-supported buildings and cable bridges (e.g., stay cables and suspenders), suffer from cumulative fatigue damage caused by dynamic loads (e.g., the cyclic traffic loads ... -
Nonlinear Time-Dependent Behavior of Composite Steel-Concrete Beams
(American Society of Civil Engineers, 2016)This paper presents a mixed finite element (FE) model for the nonlinear time-dependent analysis of composite beams with partial shear connection. The key idea is to consider, as a first approach, a viscoelastic/plastic ... -
Experimental Evaluation of Design Procedures for Fillet Welds to Hollow Structural Sections
(American Society of Civil Engineers, 2016)This paper discusses contemporary design procedures for fillet welds to hollow structural sections (HSS) in several prominent design codes. The structural reliability associated with the directional strength-enhancement ... -
Contribution of Type-X Gypsum Wall Board to the Racking Performance of Light-Frame Wood Shear Walls
(American Society of Civil Engineers, 2016)This paper presents an experimental investigation of the racking performance of light-frame wood shear walls to evaluate the effect of Type X gypsum wall board (GWB). Twelve shear walls sheathed with oriented strand board ... -
Influence of Multicolumn Removal on the Behavior of RC Floors
(American Society of Civil Engineers, 2016)With the numerous catastrophic incidences of progressive collapse in the past, there has been increasing interest from both engineering and academic communities toward evaluating the ability of reinforced concrete (RC) ... -
Impact Tests of Model RC Columns by an Equivalent Truck Frame
(American Society of Civil Engineers, 2016)An equivalent frame is developed to simulate the effect of a large-size truck colliding with a reinforced-concrete column. The surrogate frame is made of simple steel elements and blocks, representing the major features ... -
Incident and Normally Reflected Overpressure and Impulse for Detonations of Spherical High Explosives in Free Air
(American Society of Civil Engineers, 2015)Air-blast parameters, including incident and reflected peak overpressures and impulses, and shock-front arrival times, are typically estimated for protective design using charts developed by Kingery and Bulmash. The charts ... -
Shear Resisting Mechanisms and Capacity Equations for Composite Truss Beams
(American Society of Civil Engineers, 2015)This paper deals with the development of shear capacity equations for composite truss beams (CTBs). These equations are obtained from a purposely developed mechanics-based shear model. As opposed to commonly used approaches ... -
Negative Stiffness Device for Seismic Protection of Structures: Shake Table Testing of a Seismically Isolated Structure
(American Society of Civil Engineers, 2016)The concept of apparent weakening by adding true negative stiffness to a structure has been previously introduced by the authors in order to reduce simultaneous drifts, accelerations, and displacements in a structure without ... -
Axial Load and Cyclic Lateral Load Tests for Composite Columns with Steel Angles
(American Society of Civil Engineers, 2016)To enhance the structural capacity and constructability of composite columns, a prefabricated steel-reinforced concrete (PSRC) column was developed. By using the prefabricated steel cage, field rebar work is unnecessary, ... -
Analytical Modeling of the Interface between Lightly Roughened Hollowcore Slabs and Cast-In-Place Concrete Topping
(American Society of Civil Engineers, 2015)Hollowcore slabs are commonly used in different types of structures. They usually include a 50-mm concrete topping. Structural engineers can use this topping to increase the slab load-carrying capacity. North American ...