Journal of Structural Engineering: Recent submissions
Now showing items 2801-2820 of 10765
-
Experimental Characterization of a Composite Slab Subjected to Simulated Column Removal Loading
(American Society of Civil Engineers, 2016)Steel gravity frames are inherently simple systems, which has led to questions regarding their structural integrity or robustness. The concept of structural integrity is often tied to column removal scenarios in which the ... -
Incorporated Strength Capacity Technique for Limit Load Evaluation of Trusses and Framed Structures under Constant Loading
(American Society of Civil Engineers, 2015)To overcome the difficulties encountered by the elastic modulus adjustment procedures applied to the ultimate bearing capacity analysis of framed structures under combined action of both constant and varying live loads, ... -
Experimental Seismic Behavior of a Full-Scale Four-Story Soft-Story Wood-Frame Building with Retrofits. II: Shake Table Test Results
(American Society of Civil Engineers, 2016)Soft-story wood-frame buildings have been recognized as a disaster preparedness problem for decades. The majority of these buildings were constructed from the 1920s to the 1960s and are prone to collapse during moderate ... -
Funicularity through External Posttensioning: Design Philosophy and Computational Tool
(American Society of Civil Engineers, 2016)Funicular geometries, which follow the idealized shapes of hanging chains under a given loading, are recognized as materially efficient structural solutions because they exhibit no bending under design loading, usually ... -
Steel Columns Subjected to Thermal Gradients from Fire Loading: Experimental Evaluation
(American Society of Civil Engineers, 2016)This paper presents the behavior of axially loaded steel columns subjected to thermal gradients through their cross sections. Experimental tests were conducted on full-scale wide-flange steel columns with -
Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load
(American Society of Civil Engineers, 2016)Thin-walled cold-formed steel (CFS) clip angles are commonly used to connect CFS framing members or attach CFS members to the main building structure. The design provisions for CFS clip angle connectors have not been ... -
Modeling, Analysis, and Behavior of Load-Carrying Precast Concrete Sandwich Panels
(American Society of Civil Engineers, 2016)This paper investigates the behavior of precast concrete sandwich panels (PCSPs) made with truss shear connectors, which accounts for partial shear interaction. A theoretical model is developed based on variational principles ... -
Second-Order Direct Analysis of Domelike Structures Consisting of Tapered Members with I-Sections
(American Society of Civil Engineers, 2016)A new and advanced beam-column element, namely the curved tapered-three-hinges (TTH) beam-column element, is proposed in this paper. The present element can perform large deformation analysis and explicitly simulate the ... -
Triaxial Constitutive Model for Concrete under Cyclic Loading
(American Society of Civil Engineers, 2016)This paper presents a material model for the analysis of concrete under multiaxial, cyclic loading conditions. An elastoplastic formulation, having a nonassociative flow rule to capture compression-dominated behavior, is ... -
Stainless Steel Grids for Confinement of Clay Brick Masonry Columns
(American Society of Civil Engineers, 2016)This work presents the results of an experimental investigation on the behavior of 21 solid clay brick columns internally strengthened by stainless steel grids placed in the horizontal joints of mortar. This reinforcing ... -
Practical Nonlinear Modeling of Reinforced Concrete Structural Walls
(American Society of Civil Engineers, 2016)Current engineering practice typically relies on the use of fiber-based modeling approaches with uncoupled axial-bending (P-M) and shear (V) responses to simulate nonlinear behavior of reinforced concrete (RC) structural ... -
Exploratory Study of Seismic Response of Deficient Lap-Splice Columns Retrofitted with Near Surface–Mounted Basalt FRP Bars
(American Society of Civil Engineers, 2016)This paper presents a near surface–mounted (NSM) retrofit technique to enhance the seismic performance of existing reinforced-concrete (RC) columns with lap-splice deficiencies using basalt fiber-reinforced polymer (BFRP) ... -
Near-Real-Time Hybrid System Identification Framework for Civil Structures with Application to Burj Khalifa
(American Society of Civil Engineers, 2016)This study proposes a near-real-time hybrid framework for system identification (SI) of structures using data from structural health monitoring systems. To account for both stationary/weakly nonstationary response under ... -
Capacity Evaluation of Typical Track-to-Concrete Power-Actuated Fastener Connections in Nonstructural Walls
(American Society of Civil Engineers, 2016)Damage to track-to-concrete connections has been widely reported in experimental studies on the seismic performance of nonstructural partition walls. These connections are commonly comprised of light-gauge cold-formed steel ... -
Allowable Shears for Plastered Straw-Bale Walls
(American Society of Civil Engineers, 2015)Although straw-bale construction originated in the midwestern United States in the late 1800s, the engineering of plastered straw-bale walls to resist in-plane lateral loads is a modern development. Relevant experimental ... -
Time-Dependent Analysis of Prestressed Cable Nets
(American Society of Civil Engineers, 2016)In this paper, time-dependent nonlinear numerical and analytical computational models suitable for rheological analysis of prestressed cable nets subjected to creep effects are presented. The principal aim of this contribution ... -
Experimental Performance and Structural Analysis of Plywood-Coupled LVL Walls
(American Society of Civil Engineers, 2016)Prestressed-laminated timber (Pres-Lam) design has recently been adopted for multistory timber buildings based on ongoing research at the University of Canterbury, New Zealand. This system combines large timber members ... -
Flexural-Torsional Buckling Resistance Design of Circular Arches with Elastic End Restraints
(American Society of Civil Engineers, 2016)This paper presents the flexural-torsional buckling resistance and design of steel circular arches subjected to uniform compression with elastic end bending restraints by using finite element (FE) numerical analyses. ... -
Behavior of Screw and Adhesive Connections to Gypsum Wallboard in Wood and Cold-Formed Steel-Framed Wallettes
(American Society of Civil Engineers, 2016)Increasing the lateral strength and stiffness of light-frame structures can lead to reduced damage in the event of an earthquake. Because low-rise wood and cold-formed steel-framed buildings often contain many partition ... -
Shear Deformation and Sliding-Based Fiber Beam-Column Model for Seismic Analysis of Reinforced Concrete Coupling Beams
(American Society of Civil Engineers, 2016)Conventional RC coupling beams have been widely used as key energy-dissipation components in frame-core tube structural systems for high-rise buildings. A model with sufficient efficiency, accuracy, and practicality is ...