Journal of Structural Engineering: Recent submissions
Now showing items 2781-2800 of 10765
-
Shake-Table Response of a Coupled RC Wall with Thin T-Shaped Piers
(American Society of Civil Engineers, 2017) -
Methodology for Development of Physics-Based Tsunami Fragilities
(American Society of Civil Engineers, 2017) -
Determining Ice Pressure Distribution on a Stiffened Panel Using Orthotropic Plate Inverse Theory
(American Society of Civil Engineers, 2017) -
Eccentric Compression Strength of Rectangular Concrete-Filled Tubular Columns Using High-Strength Steel Thin Plates
(American Society of Civil Engineers, 2017) -
Cyclic Testing of Reinforced Concrete Walls with Distributed Minimum Vertical Reinforcement
(American Society of Civil Engineers, 2017) -
Estimation of the Generalized Sobol’s Sensitivity Index for Multivariate Output Model Using Unscented Transformation
(American Society of Civil Engineers, 2017) -
Shear Performance of Fire-Damaged Reinforced Concrete Beams Repaired by a Bolted Side-Plating Technique
(American Society of Civil Engineers, 2017) -
Comparative Study of the Wind Characteristics of a Strong Wind Event Based on Stationary and Nonstationary Models
(American Society of Civil Engineers, 2017) -
Ultimate Strain Criteria for RC Members in Monotonic or Cyclic Flexure
(American Society of Civil Engineers, 2016)A large number of experimental curvatures in plastic hinges of concrete members are used alongside analytical moment-curvature relations to backestimate strains in the bars, the extreme concrete fibers of a section, or its ... -
Effects of Geometric Imperfections on Flexural Buckling Resistance of Laterally Braced Columns
(American Society of Civil Engineers, 2016)This paper deals with the effects of geometric imperfections on flexural inelastic buckling resistance of axially loaded columns with equally spaced lateral braces and presents a simplified way of forming the critical ... -
Discussion of “Experimental Seismic Behavior of a Full-Scale Four-Story Soft-Story Wood-Frame Building with Retrofits. I: Building Design, Retrofit Methodology, and Numerical Validation” by Pouria Bahmani, John W. van de Lindt, Mikhail Gershfeld, Gary L. Mochizuki, Steven E. Pryor, and Douglas Rammer
(American Society of Civil Engineers, 2016) -
Nailed Connection Behavior in Light-Frame Wood Shear Walls with an Intermediate Layer of Insulation
(American Society of Civil Engineers, 2016)The shear strength and stiffness of light-frame wood shear walls is highly dependent on the behavior of their individual nailed connections. Eighty-four nailed connection specimens were tested under shear loading to determine ... -
Reliability-Based Inspection Protocols for Mast-Arm Sign Support Structures
(American Society of Civil Engineers, 2016)There have been numerous examples of poor in-service performance of welded, tube-to-transverse plate connections within mast-arm sign support structures in the last several decades. A considerable amount of research has ... -
In-Plane Behavior and Design of Rectangular SC Wall Piers without Boundary Elements
(American Society of Civil Engineers, 2016)This paper focuses on the in-plane behavior, analysis, and design of steel-plate composite (SC) wall piers without boundary elements. A series of SC wall pier specimens with aspect ratios (wall height-to-length ratios, -
Modeling Error Uncertainty Characterization for Reliability-Based Fatigue Assessment in Sign Support Structures
(American Society of Civil Engineers, 2016)Sign and luminaire support structures are prevalent throughout the transportation infrastructure network. Collapse and inspection of these signs pose hazards to the motoring public and the inspection personnel charged with ... -
Experimental Seismic Behavior of a Full-Scale Four-Story Soft-Story Wood-Frame Building with Retrofits. I: Building Design, Retrofit Methodology, and Numerical Validation
(American Society of Civil Engineers, 2016)Soft-story wood-frame buildings have been recognized as a disaster preparedness problem for decades. There are tens of thousands of these multifamily three- and four-story structures throughout California and other parts ... -
Performance of Steel Energy Dissipators Connected to Cross-Laminated Timber Wall Panels Subjected to Tension and Cyclic Loading
(American Society of Civil Engineers, 2016)This paper presents a new alternative energy dissipation solution to be used with cross-laminated timber (CLT) self-centering walls. CLT is a relatively new building product in North America and could potentially be used ... -
Experimental Testing of Posttensioned Timber Frames under Gravity Loading
(American Society of Civil Engineers, 2015)This paper describes the experimental testing campaign of one-bay and two-bay posttensioned timber frames under gravity loading. Long-span box beams, made of radiata pine laminated veneer lumber, were connected to columns ... -
Inference of Blast Wavefront Parameter Uncertainty for Probabilistic Risk Assessment
(American Society of Civil Engineers, 2015)Probabilistic risk assessment methodologies are typically employed to optimize resource allocations for blast risk mitigation schemes, which may be necessary for the design of new blast resistant facilities as well as the ... -
Three-Parameter Kinematic Theory for Shear-Dominated Reinforced Concrete Walls
(American Society of Civil Engineers, 2016)This paper is aimed at addressing the need for physically accurate and computationally effective models for predicting the response of shear-dominated reinforced concrete walls. The presented theory is based on a ...