Journal of Structural Engineering: Recent submissions
Now showing items 1681-1700 of 10765
-
Wind Effects on a Tall Building with Square Cross-Section and Mid-Side Base Columns: Database-Assisted Design Approach
(American Society of Civil Engineers, 2019)This paper illustrates the application of the database-assisted design (DAD) method to the wind design of high-rise buildings. The paper uses publicly available wind tunnel data and DAD procedures to compare responses to ... -
Capacity Design Procedure for Rocking Braced Frames Using Modified Modal Superposition Method
(American Society of Civil Engineers, 2019)Rocking braced frames (RBF) are innovative structural systems that maintain near-zero residual drift through controlled rocking and a self-centering posttensioning system. The braced frame members are designed to remain ... -
Fast and Slow Cyclic Tests for Reinforced Concrete Columns with an Improved Axial Force Control
(American Society of Civil Engineers, 2019)Cyclic tests have been widely used in earthquake engineering to experimentally evaluate the strength and postyield response of structures. It is well known that the lateral response of a structure can be significantly ... -
Fatigue Tests on Steel–Concrete Composite Beams Subjected to Sagging Moments
(American Society of Civil Engineers, 2019)Current shear stud fatigue capacity recommended for design of shear connectors is based on experimental data from push-out tests, and there is a need to experimentally evaluate the fatigue performance of shear connectors ... -
Residual Capacity of Axially Loaded Circular RC Columns after Lateral Low-Velocity Impact
(American Society of Civil Engineers, 2019)RC bridge columns that are at risk for collision loading must be designed for lateral impact load. Because bridge columns must also support axial loads, evaluating the residual axial capacity and collapse risk of impact-damaged ... -
Postbuckling Shear Capacity of External Diaphragm Connections of CFST Structures
(American Society of Civil Engineers, 2019)This paper presents experimental and analytical studies on the seismic behavior of beam-to-column connections with external diaphragms in the concrete-filled steel tubular (CFST) structures. Three cruciform joints between ... -
SHM-Based Seismic Performance Assessment of High-Rise Buildings under Long-Period Ground Motion
(American Society of Civil Engineers, 2019)Long-period ground motions from large-magnitude distant earthquakes can cause serious damage to high-rise buildings, even to those located in intraplate urban areas. Real-time monitoring and postearthquake performance ... -
Phenomenological Hysteretic Model for Steel Braces Including Inelastic Postbuckling and Low-Cycle Fatigue Prediction
(American Society of Civil Engineers, 2019)This study presents a simple yet efficient phenomenological hysteretic model for hollow circular steel (HCS) braces without a middle connection in concentrically braced frames (CBFs). The model is calibrated on the basis ... -
Enhanced Power Spectral Density Transmissibility Matrix for Operational Modal Analysis of Structures
(American Society of Civil Engineers, 2019)The approach for identifying modal parameters of a structure from power spectral density transmissibility matrices, called the PSDTM-SVD method, is improved to identify modal parameters (including damping ratios) in a ... -
Experimental Study on Innovative Π-Shaped Beam-to-Column Connections under Cyclic Loading
(American Society of Civil Engineers, 2019)An innovative type of bolted beam-to-column connection by means of a Π-shaped connector welded by two flanges, one web and one end-plate is put forward in this study. Besides standard bolt holes, short-slotted bolt holes ... -
Characterization of Equivalent Struts for Macromodeling of Infilled Masonry RC Frames Subjected to Lateral Load
(American Society of Civil Engineers, 2019)Evaluation of the seismic performance of infill frame structural systems using equivalent strut models and pushover analysis has gained popularity due to the simplicity of the evaluation process. Various strut macromodels ... -
Parametric Study for Performance-Based Fire Design of US Prototype Composite Floor Systems
(American Society of Civil Engineers, 2019)Design requirements for passive fire protection of steel structures in the United States are primarily based on prescriptive approaches. Yet performance-based design has gained attention in recent years for its potential ... -
Framework for Modeling Interdependent Effects in Natural Disasters: Application to Wind Engineering
(American Society of Civil Engineers, 2019)Modeling the various aspects of a disaster scenario and the interactions that occur between them is necessary to create a meaningful and high-fidelity simulation of the event. Using a publish-subscribe pattern for data ... -
Optimization Approach to Uniformly Distributed Peak Interstory Drifts along Building Heights
(American Society of Civil Engineers, 2019)This study developed a seismic design approach, which has no need of additional structural members, to uniformly distribute the peak interstory drift ratios along building heights. The generalized building model (GBM), ... -
Probabilistic Calibration for Shear Strength Models of Reinforced Concrete Columns
(American Society of Civil Engineers, 2019)A probabilistic calibration method is proposed for evaluating the accuracy and applicability of available deterministic models for the shear strength of shear-critical reinforced concrete (RC) columns. Shear mechanisms of ... -
Long-Term Performance Assessment of an Operative Post-Tensioned Timber Frame Structure
(American Society of Civil Engineers, 2019)The concept of post-tensioned timber structures has been developed and implemented since 2005. The technology relies on unbonded post-tensioned timber elements to create a moment-resisting connection. After several years ... -
Analytical Model for Tensile Membrane Action in RC Beam-Slab Structures under Internal Column Removal
(American Society of Civil Engineers, 2019)An analytical approach was developed at Nanyang Technological University, Singapore, to predict structural capacities of RC beam-slab structures under the internal column removal scenario, taking into account the contribution ... -
Precast Diaphragm Response in Half-Scale Shake Table Test
(American Society of Civil Engineers, 2019)This paper summarizes key diaphragm response parameters observed during the shake table testing of a three-story precast concrete structure built at half-scale. The test structure geometry possessed an aspect ratio in plan ... -
Multihazard Design and Cost-Benefit Analysis of Buildings with Special Moment–Resisting Steel Frames
(American Society of Civil Engineers, 2019)This study evaluates the economic viability of allowing for controlled inelastic deformation of special moment–resisting buildings during wind storms. This is achieved through a set of case studies involving steel buildings ... -
Monitoring Propping System Removal in Domes and Tie-Rod Slackening from a Historical Building
(American Society of Civil Engineers, 2019)Structural health monitoring (SHM) is gaining more and more interest in historical construction. It is a tool that controls, verifies, and informs about the condition or changes in the structure so that engineers can obtain ...