• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Fatigue Tests on Steel–Concrete Composite Beams Subjected to Sagging Moments

    Thumbnail
    View/Open
    %28ASCE%29ST.1943-541X.0002326.pdf (3.315Mb)
    Date
    2019
    Author
    Ayman El-Zohairy
    Hani Salim
    Aaron Saucier
    Metadata
    Show full item record
    Abstract
    Current shear stud fatigue capacity recommended for design of shear connectors is based on experimental data from push-out tests, and there is a need to experimentally evaluate the fatigue performance of shear connectors in steel-concrete composite beams. Therefore, this paper presents the results of four composite beams tested under fatigue with different degrees of shear connection. The fatigue testing was carried out to a million cycles under bending with two different amplitudes. The residual strength of steel-concrete composite beams was evaluated by performing static tests until failure after the completion of the fatigue tests for each of the specimens. The testing measurements included midspan deflection, slippage between the steel beam and concrete deck, shear connector strains, and strains in the concrete deck and bottom steel flange. Based on the experimental results, degrees of the shear connection between the steel beam and the concrete deck played a major role in controlling the longitudinal fatigue cracks in the concrete deck. The residual deflection and plastic slippage increased as the fatigue of cycles increased. This is caused by the damage in the concrete deck that developed around the shear studs, which led to a reduction in the composite stiffness. The shear connectors’ strain ranges gradually increased due to the accumulation of damage as the number of cycles increased. Based on the results of this paper, it is concluded that the current shear stud fatigue design curve predicts a lower fatigue life for the shear connectors.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4259891
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV