Journal of Structural Engineering: Recent submissions
Now showing items 1541-1560 of 10765
-
Probabilistic Models for Temperature-Dependent Strength of Steel and Concrete
(ASCE, 2020)Structural risk assessment against fire requires robust material models that take into account the uncertainty in material behavior over a range of elevated temperatures. Such probabilistic material models can directly ... -
Response of Recycled Coarse Aggregate Concrete Subjected to Pure Shear
(ASCE, 2020)There is increasing interest in using recycled aggregate in concrete. Prior research has focused primarily on the compressive and tensile strength of recycled aggregate concrete (RAC), and no data pertaining to the pure-shear ... -
Hydrostatic Response of Deployable Hyperbolic-Paraboloid Umbrellas as Coastal Armor
(ASCE, 2020)This paper introduces an innovative structural system consisting of four-sided hyperbolic-paraboloid (hypar) roof umbrellas as hard countermeasures against nearshore hazards. The umbrellas line the coast and remain upright ... -
Automated Assessment of Building Damage from Seismic Events Using Smartphones
(ASCE, 2020)This paper addresses automated reconnaissance of building damage from seismic events using smartphones. Damage assessment is enabled by computation of interstory drift ratios (IDR) and comparison of those ratios with known ... -
Effect of Confining Reinforcement on Fire Behavior of Reinforced Concrete Columns: Experimental and Numerical Study
(ASCE, 2020)This paper studies the role of confining reinforcement on the compression behavior of axially loaded reinforced concrete (RC) columns at elevated temperatures. To demonstrate, experimental tests are conducted on 10 RC stub ... -
Reliability Evaluation of Semirigid Steel Frames Using Advanced Analysis
(ASCE, 2020)In this paper, an efficient method for determining the reliability of semirigid steel frames is presented. An advanced analysis using the beam-column approach and the zero-length semirigid model is used to predict structural ... -
Design of Aluminum Alloy Channel Section Beams
(ASCE, 2020)Aluminum alloy members of channel sections are widely used in lightweight structures, especially as pillars of curtain wall systems and brace and chord members in roof trusses. This paper presents both experimental and ... -
Strength and Deformation Capacity of Tension and Flexural RC Members Containing Steel Fibers
(ASCE, 2020)A misnomer exists within the literature on the topic of ductility (deformation capacity) in steel fiber reinforced concrete (SFRC) members subjected to flexure. Several studies report that the addition of fibers to reinforced ... -
Modeling Hysteretic Behavior of Lateral Load-Resisting Elements in Traditional Chinese Timber Structures
(ASCE, 2020)Dou-gong connections and mortise-tenon jointed traditional timber frames are widely used in traditional Chinese timber structures to resist lateral loads. Such elements exhibit strong nonlinearity in unloading routes, ... -
Slenderness Effects in Naturally Buckling Braces under Seismic Loads
(ASCE, 2020)Concentrically braced frames (CBFs) are commonly used in steel building structures to rapidly increase structural stiffness, especially in high seismic regions. However, conventional buckling braces have been verified to ... -
Laboratory Experiments of Vertical Cylinders Representative of Aboveground Storage Tanks Subjected to Waves
(ASCE, 2020)This paper presents an overview of laboratory experiments of vertical cylinders representative of aboveground storage tanks (ASTs) subjected to waves. The main objective is to provide an experimental dataset for the ... -
Lateral Resistance Reduction to Cold-Formed Steel-Framed Shear Walls under Various Fire Scenarios
(ASCE, 2020)This paper examines the structural response of cold-formed steel-framed building lateral force-resisting systems under combinations of simulated earthquake and fire loading. Full-scale experiments with gypsum-sheet steel ... -
Consistent and Simplified Direct Strength Method for Design of Cold-Formed Steel Structural Members under Localized Loading
(ASCE, 2020)The direct strength method (DSM) is a newly developed design method for cold-formed steel members due to its reliability and consistency. It has been well developed and incorporated in the North American Specification and ... -
Development and Utilization of a Database of Infilled Frame Experiments for Numerical Modeling
(ASCE, 2020)Reliable analytical and empirical models of the force-deformation parameters used to characterize the nonlinear behavior of masonry panels are essential to simulating the seismic response of infilled reinforced concrete ... -
Reduced-Order Modeling of Composite Floor Slabs in Fire. II: Thermal-Structural Analysis
(ASCE, 2020)This paper describes a reduced-order modeling approach for the thermal and structural analysis of fire effects on composite slabs with profiled steel decking. The reduced-order modeling approach, which uses alternating ... -
Strengthening RC Beams Using Stainless Steel Continuous Reinforcement Embedded at Ends
(ASCE, 2020)An innovative system for the flexural strengthening of RC structures designated continuous reinforcement embedded at ends (CREatE) is presented in this research work. The main characteristics and procedures for the application ... -
Design of Structures That Adapt to Loads through Large Shape Changes
(ASCE, 2020)Adaptive structures can modify their geometry and internal forces through sensing and mechanical actuation in order to maintain optimal performance under changing actions. Previous work has shown that well-conceived adaptive ... -
Pres-Lam Buildings: State-of-the-Art
(ASCE, 2020)Post-tensioned timber (Pres-Lam) buildings have been constructed throughout the world, beginning in 2010. The technology, which originated from low-damage concrete building applications, relies on unbonded post-tensioning ... -
Galloping Stability Criterion for 3-DOF Coupled Motion of an Ice-Accreted Conductor
(ASCE, 2020)This study presents an analytical galloping stability criterion for a three-degree-of-freedom (3-DOF) coupled motion of an ice-accreted conductor by using the eigenvalue perturbation method. To compare the validity of this ... -
Seismic Collapse Risk Assessment of Posttensioned Controlled Rocking Masonry Walls
(ASCE, 2020)The use of vertical unbonded posttensioned (PT) bars in masonry walls results in a controlled rocking behavior that can provide a high drift capacity and recenter the wall to its vertical alignment, minimizing residual ...