• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Seismic Collapse Risk Assessment of Posttensioned Controlled Rocking Masonry Walls

    Thumbnail
    View/Open
    %28ASCE%29ST.1943-541X.0002599.pdf (4.739Mb)
    Date
    2020
    Author
    Ahmed Yassin
    Mohamed Ezzeldin
    Taylor Steele
    Lydell Wiebe
    Metadata
    Show full item record
    Abstract
    The use of vertical unbonded posttensioned (PT) bars in masonry walls results in a controlled rocking behavior that can provide a high drift capacity and recenter the wall to its vertical alignment, minimizing residual drifts after a seismic event. However, because posttensioned controlled rocking masonry walls (PT-CRMWs) are a relatively new seismic force resisting system relative to conventional reinforced masonry (RM) walls with bonded reinforcement (i.e., fixed base walls), no distinct seismic response modification factors are yet provided in North American building codes and design standards for PT-CRMWs. In addition, following the FEMA P695 methodology, the National Institute of Standards and Technology (NIST) reported that some conventional low-rise RM walls could experience an excessive risk of collapse under the maximum considered earthquake (MCE). For these reasons, the current study evaluates the collapse risk of PT-CRMWs when designed using the seismic response modification factors currently assigned for special RM walls. In this respect, OpenSees is first used to develop and validate multispring macro models to simulate the seismic response of 20 PT-CRMWs with different configurations and axial load levels. The models are then used to perform nonlinear static and dynamic analyses following the FEMA P695 methodology, which involves evaluating the wall overstrength and seismic collapse margin ratio relative to the MCE. The results demonstrate that low-rise PT-CRMWs, designed with the seismic response modification factors currently assigned by the North American building codes and design standards to special RM walls, can meet the FEMA P695 acceptance criteria for the expected seismic collapse risk under the MCE. However, the peak forces in high rise PT-CRMWs are governed by higher mode effects, which increase the collapse risk due to shear. Finally, the influence of confinement on reducing the collapse risk of PT-CRMW archetypes is evaluated.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4266636
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV