Journal of Structural Engineering: Recent submissions
Now showing items 1461-1480 of 10765
-
Strength Prediction of Mass-Timber Panel Concrete-Composite Connection with Inclined Screws and a Gap
(ASCE, 8/1/2020 1)Mass timber panels (MTPs) are a new generation of engineered wood panels that are available in large plane dimensions to facilitate fast floor construction with the obvious environmental benefit of being from a renewable ... -
Experimental Investigation of Base Conditions Affecting Seismic Performance of Mass Plywood Panel Shear Walls
(ASCE, 8/1/2020 1)Mass plywood panels (MPP) are a new engineered wood material produced by Freres Lumber Company, Inc. in Lyons, Oregon. This paper presents a study of the lateral-load response of MPP walls connected to different base ... -
Experimental Parametric Characterization of Bolted Angle Connection Behavior
(ASCE, 8/1/2020 1)This article describes an extensive experimental program that was conducted to characterize comprehensively the nonlinear sectional force-displacement response of bolted steel angle semirigid connections. A total of 139 ... -
Design for Deconstruction Using Sustainable Composite Beams with Precast Concrete Planks and Clamping Connectors
(ASCE, 8/1/2020 1)This paper presents the results of full-scale flexural testing of deconstructable composite beams that are part of a sustainable composite floor system. In this system, steel beams are attached with precast concrete planks ... -
Wind Resistance and Fragility Functions for Wood-Framed Wall Sheathing Panels in Low-Rise Residential Construction
(ASCE, 8/1/2020 1)The wind uplift resistance of wood roof sheathing panels has been the subject of many engineering studies due to the high probability that roofs are subjected to large uplift loads during intense wind events. However, few ... -
Parametric Study of Seismic Isolation Properties for Light-Frame Houses
(ASCE, 10/1/2020 )Seismic isolation is a proven technology to protect structures from large earthquakes; however, it has not been extensively implemented in light-frame residential houses in the United States because of perceived high costs, ... -
Mixed Formulation of Inelastic Composite Shear Beam Element
(ASCE, 10/1/2020 )This study presents a new beam element formulation following a Hellinger-Reissner functional for composite members considering coupling between bond-slip and shear deformations. A robust state determination along with new ... -
Stiffness Demand on Stiffeners of Vertically Stiffened Steel Plate Shear Wall
(ASCE, 6/1/2020 1)Elastic buckling of steel plate shear walls (SPSWs) vertically stiffened by either flat-bar or closed-section stiffeners is studied first to determine the required bending stiffness on stiffeners. The torsional stiffness ... -
Development of Strut-and-Tie Models Using Load Path in Structural Concrete
(ASCE, 5/1/2020 1)Strut-and-tie modeling (STM) is widely used in the design of discontinuity regions (D-regions) in structural concrete, but can be hampered by hand-based and experience-dependent problems in the construction of the model. ... -
IDE-MLSSVR-Based Back Analysis Method for Multiple Mechanical Parameters of Concrete Dams
(ASCE, 8/1/2020 1)A back analysis method based on multioutput least-squares support vector regression machine (MLSSVR) and improved differential evolution algorithm (IDE) is proposed to estimate multiple mechanical parameters of concrete ... -
Flexural Behavior of Cold-Formed Steel-Timber Composite Flooring Systems
(ASCE, 5/1/2020 1)Composite flooring systems comprising cold-formed steel beams and timber floorboards have been proposed recently for building flooring as efficient, economical, durable, and sustainable solutions. In this study, a parameterized ... -
Effect of Thermal Gradient on Ductility of Seismic Anchor
(ASCE, 4/1/2020 1)In certain applications, a significant thermal gradient exists along the length of a seismic anchor. The yield strength of steel depends on temperature. Therefore, the strength of a steel anchor varies along its length. ... -
Dynamic Behavior of Super High-Rise Building: Deployment of Smart Monitoring System and Analysis
(ASCE, 4/1/2020 1)Unprecedented high-rise buildings pose new challenges for earthquake engineering. Full-field structural health monitoring (SHM) systems have flourished to address these challenges. In this study, a smart SHM system with ... -
Verification of ASCE 7-16 Pressure Coefficients and Database-Assisted Design of Purlins and Girts Accounting for Wind Directionality
(ASCE, 3/1/2020 1)For the database-assisted design (DAD) of low-rise building purlins and girts, a method is proposed that explicitly accounts for wind directionality by using directional wind tunnel measurements, directional wind speed ... -
Prediction Models for Modal Parameters of Supertall Buildings Based on Field Measurements
(ASCE, 2/1/2020 1)The dynamic properties of seven supertall buildings that are currently among the world’s 30 tallest are evaluated using field measurements collected during tropical cyclone events. In this study, the natural frequencies ... -
Effects of Strain Rate on the Hysteretic Behavior of Buckling-Restrained Braces
(ASCE, 1/1/2020 1)Two groups of geometrically identical buckling-restrained braces (BRBs) were subjected to either dynamic or quasi-static uniaxial loading until the cores fractured to investigate the effect of the strain rate on the ... -
Torsional Brace Strength Requirements for Steel I-Girder Systems
(ASCE, 1/1/2020 1)Effective stability bracing of beams can be achieved by either preventing lateral movement of the compression flange or restraining twist of the beam cross section. Bracing that restrains twist is aptly referred to as ... -
Comparative Environmental Analysis of Seismic Damage in Buildings
(ASCE, 2/1/2020 1)In studying the environmental impacts of buildings, earthquake hazards are rarely considered, but their environmental impacts can be significant. This case study paper demonstrates how the US Federal Emergency Management ... -
Hurricane Surge-Wave Building Fragility Methodology for Use in Damage, Loss, and Resilience Analysis
(ASCE, 1/1/2020 1)Physics-based fragilities for damage, loss, and resilience analysis are needed to model a community to earthquakes, hurricane winds, tornados, or floods. Currently, most building flood fragilities such as those available ... -
Damage Mitigation of Near-Full–Scale Deployable Tensegrity Structure through Behavior Biomimetics
(ASCE, 1/1/2020 1)Opportunities to explore new structural behavior are made possible by incorporating sensors and actuators in civil-engineering infrastructure. Using analogies, structural behavior can be improved through the mimicry of a ...