Journal of Structural Engineering: Recent submissions
Now showing items 1381-1400 of 10765
-
Cyclic Behavior of Corrugated Double-Skin Composite Walls with Different Aspect Ratios
(ASCE, 10/1/2020 )Experiments and finite element (FE) simulations were conducted on corrugated double-skin composite (Co-DSC) walls consisting of concrete-filled steel tubes (CFTs) and corrugated steel faceplates connected by tie bolts with ... -
Numerical Study on Impulse Reduction Performance of Protective Barriers Made of Steel Posts
(ASCE, 10/1/2020 )Protective barriers are frequently used to protect buildings and their inhabitants from blast and vehicle impact. This paper presents numerical investigations of the impulse reduction performance of protective barriers ... -
Evaluation of FIV3 as an Intensity Measure for Collapse Estimation of Moment-Resisting Frame Buildings
(ASCE, 10/1/2020 )Seismic collapse estimations strongly depend on selecting an intensity measure that minimizes the dispersion in collapse capacities and any possible bias. This study evaluates the recently proposed Filtered Incremental ... -
Lateral-Torsional Buckling of Singly Symmetric I-Girders with Stepped Flanges
(ASCE, 10/1/2020 )Guidance for the lateral-torsional buckling behavior of singly-symmetric, nonprismatic (stepped flanges) sections are often absent from design specifications or are overly simplified. This paper presents simplified design ... -
Experimental Evaluation of a Rocking Damage-Free Steel Column Base with Friction Devices
(ASCE, 10/1/2020 )This paper presents the experimental evaluation of an earthquake-resilient rocking damage-free steel column base, previously proposed and numerically investigated by the authors. The column base uses post-tensioned ... -
Structural Performance of Steel Shelf Angles with Thermally Improved Detailing
(ASCE, 10/1/2020 )Structural elements that span the building envelope are susceptible to becoming thermal bridges, transferring heat and energy between interior and exterior. This is especially true with steel structural elements. As part ... -
Vision-Based Monitoring of Post-Tensioned Diagonals on Miter Lock Gate
(ASCE, 10/1/2020 )Miter gates are structures that act as both the damming surface and doorway of lock chambers and are commonly found on American rivers. Miter gates are assumed to have very little torsional stiffness, and their geometry ... -
Seismic Repair Assessment of Hybrid Sliding–Rocking Bridge Columns through Integrated Experimentation and Expert Panel Solicitation
(ASCE, 9/1/2020 1)Due to the large number of bridges that will need upgrade, retrofit, or replacement in coming years, there is an increasing need for seismic bridge design techniques that are compatible with accelerated bridge construction ... -
Optimal Evolutionary Seismic Design of Three-Dimensional Multistory Structures with Damping Devices
(ASCE, 10/1/2020 )Current seismic codes do not incorporate a well-established methodology for the properties and topological distribution of damping devices in three-dimensional multistory structures. The issue is further exaggerated when ... -
Development of Hysteretic Model with Dynamic Effect and Deterioration for Seismic-Performance Analysis of Reinforced Concrete Structures
(ASCE, 10/1/2020 )In this paper, an innovative approach is developed to consider the impacts of dynamic effect and deterioration on the seismic performance analysis of reinforced concrete (RC) frame structures. Firstly, based on the dynamic ... -
Experimental and Numerical Study of Fixed-Ended High-Strength Aluminum Alloy Angle-Section Columns
(ASCE, 10/1/2020 )High-strength aluminum alloys are emerging and gaining increasing prominence in structural engineering. The structural behavior and design of 7A04-T6 high-strength aluminum alloy equal-leg angle-section columns under axial ... -
Collapse Performance of Limited Ductile High-Strength RC Columns under Unidirectional Cyclic Actions
(ASCE, 10/1/2020 )The seismic behavior of ductile high-strength RC (HSRC) columns that are constructed in regions of high seismicity is well understood due to a number of experimental studies conducted over the last few decades. However, ... -
Experimental and Analytical Testing of a Rotational Friction Connection for Metal Buildings with Hard Walls
(ASCE, 10/1/2020 )Metal building systems clad in masonry or precast concrete panels (hard walls) have been shown through analytical studies, shake table tests, and postearthquake reconnaissance to be susceptible to collapse under significant ... -
Seismic Demand on Acceleration-Sensitive Nonstructural Components in Viscously Damped Braced Frames
(ASCE, 9/1/2020 1)This paper investigates the seismic demand on acceleration-sensitive nonstructural components in buildings equipped with fluid viscous dampers. Nonlinear dynamic response analyses were conducted on three steel moment-resisting ... -
Full-Scale Measurements of Wind Pressures on a Low-Rise Building during Typhoons and Comparison with Wind Tunnel Test Results and Aerodynamic Database
(ASCE, 10/1/2020 )This study investigated wind-induced pressures on an instrumented low-rise building with gable roof and roof overhang during Typhoons Mujigae and Sarika by means of full-scale measurements. Then, detailed wind tunnel tests ... -
Future Hot-Rolled Asymmetric Steel I-Beams
(ASCE, 9/1/2020 1)The purpose of the presented research is to evaluate the potential future manufacturing of hot-rolled asymmetric I-beams (AIBs) for construction in building floor systems. This technical note presents some of the primary ... -
CFD to VorTECH Pressure-Field Comparison and Roughness Effect on Flow
(ASCE, 9/1/2020 1)A numerical simulator that very closely resembles the experimental tornado simulator facility called VorTECH at Texas Tech University (TTU) is modeled using three-dimensional simulation. Details of an efficient, simplified ... -
Prediction of Transfer Lengths Inclusive of Conventional and High-Strength Strands
(ASCE, 9/1/2020 1)Twelve concrete prisms pretensioned with 2,400-MPa strands were fabricated to investigate the effects of initial prestress (fpi), concrete compressive strength at prestress release (fci′), and the spacing of the lateral ... -
Distortional Buckling of Cold-Formed Steel Flanges under Stress Gradient
(ASCE, 9/1/2020 1)The strength of cold-formed steel beams with stiffened flanges may be controlled by distortional buckling. Buckling stress prediction methods have been developed for flanges under uniform compression. However, channel ... -
Snow Capture Walls
(ASCE, 9/1/2020 1)A common structural design challenge arises when a new structure is built adjacent to an existing structure with a lower roof. Retrofitting the existing building for the now expected leeward snowdrift is typically difficult ...