Journal of Structural Engineering: Recent submissions
Now showing items 1341-1360 of 10765
-
Shear Capacity of Reinforced Concrete T-Beams Retrofit with Externally Bonded CFRP Fabric: A New Perspective
(ASCE, 12/1/2020 )Unanchored U-wrapped externally bonded carbon-fiber-reinforced polymer (CFRP) fabrics are widely used to increase the design shear strength of existing reinforced concrete slab-on-beam structures, but current design models ... -
Optimized Seismic Design of Passively Damped Outriggers Considering Perimeter Column Flexibility
(ASCE, 12/1/2020 )This paper presents a formal optimization methodology for the damped outrigger problem under stochastic seismic excitations. An efficient analytical model is developed utilizing a Maxwell model connection between the core ... -
Seismic Performance of RC Beam–Column Joints Constructed with Engineered Cementitious Composites
(ASCE, 12/1/2020 )This paper presents experimental and analytical investigations carried out on RC beam–column joints incorporating engineered cementitious composite (ECC) material in the beam–column joint region. Six interior and exterior ... -
Simplified Analytical Nonlinear Model for Contact Problem between Precast Concrete Beams and Elastomeric Bearing Pads
(ASCE, 11/1/2020 )This paper presents an advance in the analytical prediction of the contact interaction between bearing pads and precast beams. Contact problems are typically nonlinear, and until recently, there was no analytical proposition ... -
Compressive Resistance of Eccentrically Connected Gusset Plates
(ASCE, 12/1/2020 )A new experimental study with six bolted single-brace eccentric gusset plate connection specimens is presented in this paper. The observed collapse mechanism with two plastic hinges is consistent with previous findings ... -
Assessment of Building Robustness against Disproportionate Collapse
(ASCE, 12/1/2020 )This paper presents a methodology to assess the robustness of moment-resisting RC frame buildings under multiple-column-loss scenarios. In the proposed approach, kinetic and strain energy are employed as objective measures ... -
Experimental Study on the Fire-Induced Collapse of Single-Layer Aluminum Alloy Reticulated Shells with Gusset Joints
(ASCE, 12/1/2020 )This paper aims at investigating the fire-induced collapse behavior of aluminum alloy shells with gusset joints through an experimental analysis. The scale test model (geometric scaling coefficient=1/5) was composed of a ... -
Behavior of Nuclear RC Shear Walls Designed for Similar Lateral Strengths Using Normal-Strength versus High-Strength Materials
(ASCE, 11/1/2020 )This paper describes an experimental investigation on the use of high-strength steel and high-strength concrete to reduce the required reinforcement areas in nuclear shear walls. Two squat rectangular walls with uniformly ... -
Experimental Investigation of a Concentrically Braced Frame with Replaceable Brace Modules
(ASCE, 11/1/2020 )When designing and building special concentrically braced frames (SCBFs), the common practice is to join the brace to the frame members using a gusset plate that is sized such that the brace buckles in the out-of-plane ... -
Seismic Retrofit of Structures Using Hybrid Steel Slit–Viscoelastic Dampers
(ASCE, 11/1/2020 )A hybrid steel slit–viscoelastic damper (HSVD) has been developed to enhance seismic performance of a structure. To model viscoelastic behavior, an analytical model is developed based on the Kelvin–Voigt and Bouc–Wen–Baber–Noori ... -
Characterization of an Equivalent Coupled Flexural-Torsional Beam Model for the Analysis of Tall Buildings under Stochastic Actions
(ASCE, 11/1/2020 )An equivalent beam model to estimate the three-dimensional response of tall buildings to random loads is proposed in this paper. The model fully describes coupling between bending and torsion. In particular, bending behavior ... -
Shear-Transfer Mechanisms and Strength Modeling of RC Continuous Deep Beams
(ASCE, 11/1/2020 )Based on experimental results including the crack pattern and maximum applied strut stress, as well as on stress states obtained using a nonlinear finite-element analysis, it is identified that the typical critical shear ... -
Optimization of Geometric Parameters for Double-Arch Dams through Bayesian Implementation
(ASCE, 12/1/2020 )This paper comprises the search of the optimal geometric parameters (area and volume) for double-arch dams. The approach is structured in several consecutive stages. The process begins with a definition of the problem about ... -
Modal Strain Energy-Based Model Updating Method for Damage Identification on Beam-Like Structures
(ASCE, 11/1/2020 )Modal strain energy is a sensitive dynamic characteristic for nondestructive damage identification. In previous decades, it was widely used in damage index methods for localization of damage. However, these kind of methods ... -
Selection and Scaling of Ground Motions Using Multicriteria Optimization
(ASCE, 11/1/2020 )Although large ground motion databases are widely available today, in many occasions, the selection of ground motion records still hampers the use of nonlinear response history analysis in seismic engineering practice. ... -
Probabilistic Framework for Evaluating Community Resilience: Integration of Risk Models and Agent-Based Simulation
(ASCE, 11/1/2020 )This paper proposes a novel probabilistic framework to quantitatively evaluate the resilience of communities comprising buildings and various interdependent infrastructure systems. To this aim, the proposed framework ... -
Normalized Residual Displacements for Bilinear and Pinching Oscillators
(ASCE, 11/1/2020 )A correct estimation of residual displacements due to an earthquake event is crucial in satisfying the limit state of repairability after the event and for assessing the safety of structures against future earthquake events. ... -
Analysis of Plane-Stress Systems via Total Potential Optimization Method Considering Nonlinear Behavior
(ASCE, 11/1/2020 )As an alternative structural analysis method, total potential optimization using metaheuristic algorithms (TPO/MAs) has been demonstrated to be very effective, especially in nonlinear cases, for trusses and trusslike systems ... -
Deployment of n-Strut Cylindrical Tensegrity Booms
(ASCE, 11/1/2020 )In this paper, general methods for the analysis of deployment of n-strut cylindrical Class-1 and Class-2 tensegrity booms are developed. Investigation of the geometries of cylindrical Class-1 and Class-2 tensegrity booms ... -
Progressive Collapse of 3D Composite Floor Systems with Rigid Connections under External Column Removal Scenarios
(ASCE, 11/1/2020 )Progressive collapse of building structures has been a hot research topic since the September 11, 2001, terrorist attacks. These works provide valuable information focused more on beam–column connections and two-dimensional ...