Journal of Structural Engineering: Recent submissions
Now showing items 1181-1200 of 10765
-
Pinching-Free Connector for Timber Structures
(ASCE, 5/1/2021)In timber structures resisting earthquakes, slender steel fasteners are traditionally employed to provide ductility in the joints. However, this is associated with pinched hysteresis loops when timber fibers are irreversibly ... -
Cyclic Experiments on Sidelap and Structural Connectors in Steel Deck Diaphragms
(ASCE, 4/1/2021)This work studied the cyclic shear performance of connectors used for sidelap and structural connectors in bare steel deck roof diaphragms. Typical bare steel deck roof diaphragms include thousands of such connections, and ... -
Finite-Element Limit Analysis for Solid Modeling of Reinforced Concrete
(ASCE, 5/1/2021)Complex triaxial stress states are present in many reinforced concrete structures. These structures are often analyzed using simple hand calculations based on methods designed for plane structures. However, this can result ... -
Experimental Investigation and Finite-Element Modeling of an Aluminum Energy Dissipater for Cross-Laminated Timber Walls under Reverse Cyclic Loading
(ASCE, 4/1/2021)Cross-laminated timber (CLT) panels with unbonded post-tensioning and a rocking mechanism can be used as a robust lateral load–resisting system (LLRS). The seismic performance of these systems can be improved further by ... -
Experimental Testing and Analytical Modeling of Glulam Moment Connections with Self-Drilling Dowels
(ASCE, 5/1/2021)An experimental and analytical study on rotational behavior of glulam beam-column moment connections with self-drilling dowels (SDDs) is conducted. Connection properties including strength, stiffness, ductility, and energy ... -
Mechanical Performance of Glue-Pressed Engineered Honeycomb Bamboo under Axial Compression
(ASCE, 4/1/2021)In this study, glue-pressed engineered honeycomb bamboo (GPEHB) was prepared, and the dependence of the compressive properties of the produced GPEHB on the load–slenderness ratio, longitudinal strain–slenderness ratio, and ... -
Energy-Absorbing Connection for Heavy-Timber Assemblies Subjected to Blast Loads–Concept Development and Application
(ASCE, 4/1/2021)This paper presents the procedure for the development of energy-absorbing connections (EACs) in glued-laminated timber (glulam) and cross-laminated timber (CLT) assemblies to resist the effects of blast explosions. A ... -
Development of Temperature and Constraint-Dependent Column Demand-Capacity Curves and Their Validation through Hybrid Fire Simulations
(ASCE, 4/1/2021)The axial capacity and force demand of a steel column are expected to change continuously during a fire incident. In assessing the structural performance in the event of a fire, it is important to monitor both the capacity ... -
Estimating Earthquake-Induced Displacement Responses of Building Structures Using Time-Varying Model and Limited Acceleration Data
(ASCE, 4/1/2021)This paper presents a time-varying model-based method for estimating earthquake-induced displacement responses of building structures using limited acceleration data. First, a time-varying model which considers the variability ... -
Lumped Parameter Model for Liquid Sloshing in a Cylindrical Tank Equipped with Multiple Annular Baffles
(ASCE, 5/1/2021)A lumped parameter model for liquid sloshing in a rigid circular cylindrical tank with multiple rigid baffles under horizontal excitation is developed to represent continuous fluid. The subdomain method for liquid sloshing ... -
Investigation of Anchor Nut Loosening on Highway Ancillary Structures
(ASCE, 4/1/2021)Documented evidence shows that anchor nut loosening on highway ancillary structures has been a problem in the transportation industry since at least the 1990s. There have been reported cases in the past, where loose anchor ... -
Automated Crack Detection and Damage Index Calculation for RC Structures Using Image Analysis and Fractal Dimension
(ASCE, 4/1/2021)Damage assessment in postearthquake reconnaissance of civil structures has traditionally relied upon the judgment of experienced site inspectors. In a step toward eliminating the need for on-site inspections, this paper ... -
Numerical Modeling and Design of CFRP-Strengthened Short Steel Tubular Columns in Fire
(ASCE, 4/1/2021)This paper presents the details of a numerical study aimed at investigating the fire performance of carbon-fiber-reinforced polymer (CFRP)-strengthened short square hollow section (SHS) steel columns with and without an ... -
Effect of Unloading and Reloading on Bearing Strength of Unconfined Cold-Formed Steel Bolted Connections
(ASCE, 5/1/2021)This data paper presents the experimental investigation of unconfined cold-formed steel double-shear bolted connections where the applied load was stopped at different stages of loading (25% or 65% of the ultimate failure ... -
Impact Resistance of Steel Frames with Different Beam–Column Connections Subject to Falling-Floor Impact on Various Locations
(ASCE, 4/1/2021)In recent years, falling-floor impact scenarios have been studied because they may generate disproportionate collapse. A series of impact tests was carried out at Nanyang Technological University to investigate the dynamic ... -
Behavior and Design of Cold-Formed Steel Bolted Connections Subjected to Combined Actions
(ASCE, 4/1/2021)Cold-formed steel (CFS) moment connections are often formed by bolting the webs of the connecting elements to a stiffened gusset plate, and local buckling of the web adjacent to the connection typically governs their ... -
Parameter Identification of Main Cables of Cable Suspension Structures Based on Vibration Monitoring of Cable: Methodology and Experimental Verification
(ASCE, 4/1/2021)This paper focus on parameter identification of the main cables of cable suspension structures. Based on the dynamic stiffness theory, an inverse analysis characteristic function (IAC function) for identifying the main ... -
Constitutive Modeling of Structural Steels: Nonlinear Isotropic/Kinematic Hardening Material Model and Its Calibration
(ASCE, 4/1/2021)Numerical models of structural components that deteriorate primarily due to geometric instabilities under multiaxis cyclic loading are sensitive to both the assumed geometric imperfections and the nonlinear material model ... -
Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols
(ASCE, 4/1/2021)This paper presents results from 21 large-scale experiments on steel columns that examined their collapse behavior as related to steel moment resisting frames (MRFs). The test specimens included wide-flange and square ... -
Experimental and Analytical Studies on the Horizontal Behavior of Elastomeric Bearings under Support Rotation
(ASCE, 4/1/2021)Laminated elastomeric bearings are used widely as seismic isolation devices. Most previous studies on the horizontal behavior of elastomeric bearings have assumed that the rotations of the top and bottom supports of the ...