Journal of Structural Engineering: Recent submissions
Now showing items 1141-1160 of 10765
-
Experimental Investigation on the Seismic Behavior of a New Self-Centering Shear Wall with Additional Friction
(ASCE, 5/1/2021)In this work, a new self-centering shear wall with disc spring devices (SCSW-DSD) was developed and experimentally verified. The proposed SCSW-DSD was a combination of a reinforced concrete (RC) wall and two disc spring ... -
Design-Oriented Solutions for the Shear Capacity of Reinforced Concrete Beams with and without Fibers
(ASCE, 6/1/2021)The inclusion of fibers substantially improves the shear resistance of reinforced concrete beams. Fibers can, therefore, be used as a partial or full substitute for traditional transverse reinforcement. Before replacement ... -
Spatiotemporal Deep Learning for Bridge Response Forecasting
(ASCE, 6/1/2021)Accurate prediction/forecasting of the future response of civil infrastructure plays an essential role in health monitoring and safety assessment. However, the complex latent dynamics within the field sensing measurements ... -
Simplified Nonlinear Simulation of Rectangular Concrete-Filled Steel Tubular Columns
(ASCE, 6/1/2021)In detailed three-dimensional (3D) finite-element modeling, two-dimensional and/or 3D elements are widely used because of their high accuracy and ease of use despite the high computational cost. In contrast, simplified ... -
Cyclic Test on a Full-Scale Unreinforced Masonry Building Repaired with Steel Fiber-Reinforced Mortar Coating
(ASCE, 6/1/2021)The present work reports the results of two quasi-static reverse cyclic tests performed on an unreinforced hollow clay block masonry building before and after repairing with a single 30-mm thick layer of mortar applied on ... -
Self-Centering Hybrid GFRP-Steel Reinforced Concrete Beams for Blast Resilience
(ASCE, 7/1/2021)Despite having a high strength-to-weight ratio and being chemically inert, fiber-reinforced polymer (FRP) reinforcing bars are not currently used in reinforced concrete protective design due to their brittle nature and ... -
Use of Natural Fiber and Recyclable Materials for Spacers in Typical Space Truss Connections
(ASCE, 8/1/2021)Space trusses are extensively used to construct large free spans in roofs. In many countries, connections in such space trusses are made with tubes linked by typical space-truss connections. Typical nodes are made with the ... -
Strength and Plastic Rotation Capacity of I-Shaped Beams with Grid-Purlin System Subjected to Cyclic Loading
(ASCE, 7/1/2021)This paper introduces a grid-purlin system, which was composed of secondary rectangular-hollow-section grids welded onto the top flange of I-shaped beams of moment frames. The welded grid-purlin itself may play a role of ... -
Fragility Assessment of Typhoon-Induced Hazard to Roof Sheathing Panels of Low-Rise Building
(ASCE, 7/1/2021)Because of the vulnerability of roof sheathing panel to wind load, light-frame wood low-rise buildings often suffer from serious destructions in typhoon hazards. Efficient assessment of these hazards is an urgent need for ... -
Improved Fixed Strut-Angle Model for Analysis of Reinforced Concrete Panel Elements under Monotonic Shear Loads
(ASCE, 7/1/2021)Reinforced concrete (RC) structures are subjected to combinations of axial, shear, flexure, and torsional loading during an earthquake event. Comprehensive understanding of the behavior of shear panels is essential to ... -
Macroelement Model for the Progressive-Collapse Analysis of Infilled Frames
(ASCE, 6/1/2021)A new multistrut macromodel for the analysis of the progressive-collapse response of infilled reinforced concrete (RC) frames is presented in this paper. The model consists of three struts: two outer infinitely rigid and ... -
Shear Performance of Tapered Beams with Concrete Flanges and Corrugated Steel Webs: Theory, Experiments, and Numerical Simulations
(ASCE, 7/1/2021)This study experimentally and numerically demonstrated that the traditional basic shear method is not applicable for estimating the shear stresses in tapered beams with corrugated steel webs (CSWs). The vertical components ... -
Shear Strength of End Panels in Steel Plate Girders
(ASCE, 6/1/2021)Plate girders, usually characterized by having large depth-to-web thickness ratios, have been widely used for long-span applications in bridges and buildings. US design provisions (AISC specifications for building design ... -
Forced-Vibration Tests of a Reinforced Concrete Four-Story Building Structure
(ASCE, 7/1/2021)A set of acceleration records obtained at specific points of an actual reinforced concrete, four-story building structure subjected to forced vibrations are presented and documented in this data paper. The structure has ... -
Model Type Effects on the Estimated Seismic Response of a 20-Story Steel Moment Resisting Frame
(ASCE, 6/1/2021)Finite-element models of varying sophistication may be employed to determine a building’s seismic response with increasing complexity, potentially offering a higher fidelity at the cost of the computational load. To account ... -
Drift Capacity at Axial Failure of RC Structural Walls and Wall Piers
(ASCE, 6/1/2021)A large number of reinforced concrete (RC) buildings constructed prior to the mid-1970s in earthquake-prone regions rely on lightly reinforced or perforated perimeter structural walls to resist earthquake-induced lateral ... -
CLT Shear Walls Anchored with Shear-Tension Angle Brackets: Experimental Tests and Finite-Element Modeling
(ASCE, 7/1/2021)Due to the high in-plane stiffness and strength capacity of cross-laminated timber (CLT) panels, the mechanical behavior of CLT shear walls is mainly influenced by the mechanical performances of the connections. Several ... -
Quantifying the Ductility-Related Force Modification Factor for 10-Story Timber–RC Hybrid Building Using FEMA P695 Procedure and Considering the 2015 NBC Seismic Hazard
(ASCE, 5/1/2021)In this work, a 10-story uncoupled (10S-U) hybrid seismic force resisting system, consisting of cross-laminated timber (CLT) walls and reinforced concrete (RC) beams, is considered. Required design ductility factor Rd, in ... -
Probabilistic Models and Fragility Estimates for Unreinforced Masonry Walls Subject to In-Plane Horizontal Forces
(ASCE, 6/1/2021)Unreinforced masonry (URM) buildings make up a significant portion of the built environment, with hollow clay being the predominant choice for the units. The capacity of URM buildings is a function of the capacity of its ... -
Effects of Corrosion on Stress–Strain Behavior of Confined Concrete
(ASCE, 7/1/2021)An analytical model is proposed to predict the stress–strain relationship of confined concrete subjected to reinforcement corrosion. The stress–strain graph of confined concrete with corroded reinforcement was predicted ...