Journal of Structural Engineering: Recent submissions
Now showing items 1121-1140 of 10765
-
Numerical Investigation of High-Strength Steel and Ultrahigh-Performance Concrete for Ductile Rectangular Hollow Columns
(ASCE, 7/1/2021)Ultrahigh-performance concrete (UHPC) has the potential to address seismic performance issues reported for rectangular hollow columns. However, an impediment to the use of UHPC is its limited flexural ductility compared ... -
Peak Factor–Based Modal Combination Rule of Response-Spectrum Method for Peak Floor Accelerations
(ASCE, 7/1/2021)The seismic safety of acceleration-sensitive secondary elements rigidly connected to the primary structure can be ensured in the case of ordinary structures by simply and accurately estimating the largest peaks in the floor ... -
Punching Shear Strength Model for Reinforced Concrete Flat Slabs with Openings
(ASCE, 7/1/2021)A theoretical model is proposed to analyze the punching shear resistance in flat slabs of reinforced concrete in the presence of openings and stud-type shear reinforcement. Openings in flat slabs reduce resistance to ... -
Effect of Displacement and Hysteretic Energy on Earthquake Damage in Reinforced Concrete Structures
(ASCE, 7/1/2021)A seismic damage index is validated using data from shaking table tests on full-scale and scaled reinforced concrete (RC) specimens. The experimental specimens include wall and frame lateral building systems and ductile ... -
Prediction of Punching Shear Capacity for Fiber-Reinforced Concrete Slabs Using Neuro-Nomographs Constructed by Machine Learning
(ASCE, 6/1/2021)Punching shear capacity is an important parameter in designing structural elements. Accurate estimation of punching shear capacity typically requires rigorous calculation schemes. Especially for fiber-reinforced slabs, ... -
Multipoint Synchronous Monitoring of Cladding Pressures on a 600-m-High Skyscraper during Super Typhoon Mangkhut 2018
(ASCE, 7/1/2021)This paper analyzes the wind pressures on the claddings of a 600-m-high skyscraper in Shenzhen, China, during Super Typhoon Mangkhut on September 16, 2018. A synchronous monitoring system that included 48 pressure transducers ... -
Probabilistic-Based Approach for Evaluating the Thermal Response of Concrete Slabs under Fire Loading
(ASCE, 7/1/2021)Performance-based design for fire safety has been introduced in several international design frameworks. The fire models and simulations include various assumptions and simplifications, and the current fire resistance ... -
Experimental and Numerical Investigations on the Rotation Capacity of High-Strength Steel Beams
(ASCE, 6/1/2021)This work deals with experimental and numerical investigations on the rotation capacity of high-strength steel (HSS) I-girders. The investigation involved 20 three-point bending tests conducted on mainly homogeneous and ... -
Seismic Behavior and Design of Concrete-Filled Thin-Walled Steel Tube Column-to-Foundation Connections
(ASCE, 6/1/2021)Thin-walled steel tubes are highly recommended to be used in concrete-filled steel tube (CFST) columns due to their economic benefits. However, the inherent difficulty of connections between the steel tube and foundation ... -
Development of Enhanced Seismic Compactness Requirements for Webs in Wide-Flange Steel Columns
(ASCE, 7/1/2021)Recent full-scale testing of steel wide-flange columns under axial compression and cyclic lateral drifts for special moment frame applications showed that deep, slender columns could experience significant flexural strength ... -
Continuous Bracing Systems for Columns and Beams
(ASCE, 6/1/2021)Effective bracing systems for columns and beams exist in many forms, including point bracing and continuous bracing. Employing continuous bracing formulations for cases with point braces provides an attractive solution ... -
Flexural Performance of UHPC–Concrete–ECC Composite Member Reinforced with Perforated Steel Plates
(ASCE, 6/1/2021)A novel reinforced concrete structural member comprising ultrahigh-performance concrete (UHPC) and engineered cementitious composite (ECC) was proposed for use in underground structures, such as prefabricated utility ... -
Mixed-Mode Debonding Behavior between CFRP Plates and Concrete under Fatigue Loading
(ASCE, 5/1/2021)The cohesive zone model (CZM), which is capable of simulating the behavior of adhesively bonded joints subjected to static and fatigue loading, is widely accepted. In this study, fatigue peeling/shear of RC with externally ... -
Seismic Behavior and Design Approach of Variable-Damping Self-Centering Braced Frame
(ASCE, 6/1/2021)In this paper, the seismic performance and resilience of a 15-story variable-damping self-centering braced frame (VD–SCBF) were analyzed. The interstory drift ratios (IDRs) of the VD–SCBF are similar to those of the ... -
Load-Carrying Capacity of Corroded Gusset Plate Connection and Its Repair Using CFRP Sheets
(ASCE, 6/1/2021)Recently, several events involving the corrosion-induced damage of gusset plate connections of steel truss bridges have been reported worldwide. In this study, the remaining load-carrying capacity of a corroded gusset plate ... -
Damped Timber Shear Wall: Shake-Table Tests and Analytical Models
(ASCE, 6/1/2021)Light-timber frames, using plywood (PW), exhibit a pinched hysteresis response, and their energy absorption capacity is limited. The energy-dissipation capacity can be enhanced using energy-dissipation mechanisms. In this ... -
Collapse Performance of Nominally Identical Nonductile Circular Columns Susceptible to Failure-Mode Variability
(ASCE, 6/1/2021)Recent analytical studies have highlighted the existence of a failure-mode transition zone within which nominally identical test specimens may experience variability in failure mode between a flexure-dominated and a ... -
Objective Phenomenological Constitutive Law for Collapse Analyses in Distributed Plasticity Steel-Frame Models
(ASCE, 6/1/2021)Nonlinear static and dynamic analyses are increasingly being used to evaluate the seismic performance of structures. The level of detail that mathematical models should include depends on the required analysis. In a collapse ... -
Lateral Resistance of Sheathing-to-Framing Nailed Joints with an Intermediate Insulation Layer
(ASCE, 6/1/2021)Lateral resistance of shear walls constructed with wood-based sheathing panels and lumber framing is largely governed by the strength of the sheathing-to-framing nailed joints. In new wall designs, a layer of soft thermal ... -
Monitoring the Modal Properties of an RC School Building during the 2016 Central Italy Seismic Swarm
(ASCE, 7/1/2021)This paper presents results from the dynamic monitoring of a reinforced concrete school building located in Camerino (central Italy) during the seismic swarm following the first main shock of the Central Italy earthquake ...