Journal of Engineering Mechanics: Recent submissions
Now showing items 5201-5220 of 7001
-
Symplectic Superposition Method for Benchmark Flexure Solutions for Rectangular Thick Plates
(American Society of Civil Engineers, 2015)Benchmark flexure solutions for rectangular thick plates with combinations of clamped and simply supported edges, as well as for cantilever rectangular thick plates, are obtained by using an up-to-date symplectic superposition ... -
Updating Anomaly Statistics—Multiple Anomaly Pieces
(American Society of Civil Engineers, 1988)Satisfactory geotechnical performance could be marred by hazards induced by unexpected presence of geologic anomalies. Engineers may need to assess the likelihood of anomaly occurrences and the size statistics, and to ... -
Nonlinear Shallow Curved‐Beam Finite Element
(American Society of Civil Engineers, 1988)A geometrically nonlinear curved‐beam finite element is derived and is applied to the load‐deflection and buckling analysis of shallow and deep arches. The element stiffness properties are derived relative to a moving ... -
Generalized Warping Analysis of Composite Beams of an Arbitrary Cross Section by BEM. I: Theoretical Considerations and Numerical Implementation
(American Society of Civil Engineers, 2014)In this two-paper contribution, a general formulation for the nonuniform warping analysis of composite beams of arbitrary simply or multiply connected cross sections, under arbitrary external loading and general boundary ... -
Buckling Test of Prestressed Arches in Centrifuge
(American Society of Civil Engineers, 1988)Buckling and postbuckling behavior of prestressed arches that make up the skeleton of a large‐size clear‐span prestressed dome under self‐weight are studied using centrifuge model testing and a nonlinear finite‐element ... -
Elastoplastic Shell Element Based on Assumed Covariant Strain Interpolations
(American Society of Civil Engineers, 1988)A curved, nine‐node -
Local Transmitting Boundaries
(American Society of Civil Engineers, 1988)Transmitting boundaries are mathematical artifacts used to prevent wave reflections at the edges (or boundaries) of discrete models for infinite media under dynamic loads. Since the discrete models used are necessarily ... -
Discussion of “<i>Static Stability of Curved Thin‐Walled Beams</i>” by Yeong‐Bin Yang and Shyh‐Rong Kuo (August, 1986, Vol. 112, No. 8)
(American Society of Civil Engineers, 1988) -
Grain Boundary Migration in Metals: Thermodynamics, Kinetics, Applications
(American Society of Civil Engineers, 2000) -
Cylindrical Shell Slice‐Beam
(American Society of Civil Engineers, 1988)A mathematical model for a circular cylindrical shell subjected to nonaxisymmetrical loading is developed based on a slice-beam free-body. Equations of overall equilibrium are used to derive closed-form expressions for the ... -
Optimal Shape of Arches under Bending and Axial Compression
(American Society of Civil Engineers, 1988)The paper concerns the optimal shape of plastically designed arches under bending and axial compression. In view of the absolute term found in the specific weight, the optimization problem is that of a nonsmooth one. An ... -
Buckling of Nonuniform Plates: Spline Method
(American Society of Civil Engineers, 1988)Collocation with quintic splines is used to solve the differential equation of transverse deflection of a rectangular plate of nonuniform thickness subject to in-plane compressive loads. An algorithm is presented for the ... -
Free Vibration Behavior of Tapered Beam Columns
(American Society of Civil Engineers, 1988)In continuation of their earlier work on free vibration behavior of uniform beams in the presence of an axial load, the writers of this note evaluate the vibration characteristics of tapered beam-columns. The Rayleigh-Ritz ... -
Strains and Displacements in Stochastic Stress Models
(American Society of Civil Engineers, 1988)The stochastic model of stress distributions in loaded granular half‐spaces is extended to describe strains and displacements by postulating a linear constitutive equation with position‐dependent moduli, which is consistent ... -
Plates on Biparametric Elastic Foundation by BDIE Method
(American Society of Civil Engineers, 1988)An efficient boundary differential integral equation (BDIE) method is presented for the analysis of thin elastic plates with free boundaries of any shape resting on biparametric elastic foundation. The plate, which may ... -
Systems Identification of Degrading Hysteretic Restoring Forces
(American Society of Civil Engineers, 1988)A degrading, hysteretic restoring force model for structures subjected to extreme dynamic loads has been developed by Wen (1976; 1980) and Baber and Wen (1981). A need has arisen for systematically identifying the parameters ... -
Modeling of Flexural Behavior and Punching Shear of Concrete Bridge Decks with FRP Stay-in-Place Forms Using the Theory of Plates
(American Society of Civil Engineers, 2014)A robust analytical model for predicting full response and ultimate load of concrete bridge decks constructed with fiber-reinforced polymer (FRP) stay-in-place (SIP) structural forms is presented. It adopts the plate theory ... -
Response of Uncertain Systems to Stochastic Excitation
(American Society of Civil Engineers, 1988)The reliability of structural systems with time‐invariant, uncertain parameters subjected to stochastic excitation is investigated. The properties of the system, such as stiffness, mass, and damping, are uncertain, and are ... -
Flow Through Disc‐Type Valve. II: Study on Disc Size and Position
(American Society of Civil Engineers, 1988)An investigation is performed to study the effect of the disc position and thickness on the characteristics of turbulent flow past the disc valve. The governing equations with a -
Closure to “<i>Tsunami Hazard</i>” by I.-Chen Lin and C. C. Tung (September 1986, Vol. 112, No. 9)
(American Society of Civil Engineers, 1988)