Journal of Engineering Mechanics: Recent submissions
Now showing items 5181-5200 of 7001
-
Discussion of “On the Comparison of Timoshenko and Shear Models in Beam Dynamics” by Noël Challamel
(American Society of Civil Engineers, 2008) -
Tall Column Reliability under Nonstationary Loads: Model Application
(American Society of Civil Engineers, 1988)A nonstationary stochastic model is used to determine the reliability of tall industrial columns. A typical distilling column from an oil refinery is defined for the analysis and a standard set of ground motion parameters ... -
Plasticity‐Damage Model for Concrete under Cyclic Multiaxial Loading
(American Society of Civil Engineers, 1993)A model that combines plasticity and damage mechanics is developed to assess both multiaxial monotonic and cyclic behavior of concrete. The model adopts a bounding surface concept and combines plastic deformation with the ... -
Tall Column Reliability under Nonstationary Loads: Model Formulation
(American Society of Civil Engineers, 1988)The reliability of tall cantilever structures subjected to earthquake loads is evaluated using a stochastic dynamic response model. Since tall columns are typically very slender, the model considers the effects of both ... -
Cone‐Cylinder Intersection under Pressure: Axisymmetric Failure
(American Society of Civil Engineers, 1994)This paper presents a detailed finite‐element investigation into the axisymmetric failure behavior and strength of intersections of the large end of a cone and a cylinder subject to uniform internal pressure. The study ... -
Closure to “<i>Reduced Integrated Nonconforming Plate Element</i>” by Chang‐Koon Choi (April, 1986, Vol. 112, No. 4)
(American Society of Civil Engineers, 1987) -
Erratum: “Stress Optimized Suspended Liquid Containers” by N. Jnanasekaran and D. Stephen Sandegren (September, 1984, Vol. 110, No. 9)
(American Society of Civil Engineers, 1986) -
Closure to “<i>Numerical Differentiation Using Gaussian Quadrature</i>” by B. L. Ly (November, 1990, Vol. 116, No. 2)
(American Society of Civil Engineers, 1992) -
Closure to “<i>Cylindrical Shell Slice‐Beam</i>” by Philip L. Gould (May 1988, Vol. 114, No. 5)
(American Society of Civil Engineers, 1989) -
Thermal Consolidation of Thick and Soft Soil Layer
(American Society of Civil Engineers, 1988)A linearized theory of one‐dimensional thermoelastic consolidation is given for a layer of soft soil such as clay. Emphasis is placed on the effects of gravity in the presence of heat‐induced volume changes in both the ... -
Model of Infinitesimal Nonlinear Elastic Response of Concrete Subjected to Uniaxial Compression
(American Society of Civil Engineers, 2015)Unreinforced portland-cement concrete exhibits a nonlinear relationship between applied stress and observed strain, even though the strains are at magnitudes that warrant the infinitesimal strain approximation (i.e., the ... -
Yield Surface Modeling of I‐Sections with Nonuniform Torsion
(American Society of Civil Engineers, 1988)This paper presents the yield surface equations for I‐sections with nonuniform torsion. For an I‐beam subjected to three‐dimensional loadings, five stress resultants are needed in defining the yield surface equations using ... -
Optimal Control of Tall Buildings
(American Society of Civil Engineers, 1988)An analysis of optimal modal control for tall buildings subjected to earthquake excitation is presented. The output feedback control system is applied under the circumstances that the state of the plant cannot be completely ... -
3D Finite-Deformation Beam Model with Viscous Damping: Computational Aspects and Applications
(American Society of Civil Engineers, 2015)A nonlinear finite-element formulation for the static and dynamic behavior of flexible beams was developed by appropriately modifying and extending the three-dimensional (3D) finite-deformation beam model originally developed ... -
Analysis of Shallow Shells with Rectangular Projection: Applications
(American Society of Civil Engineers, 1988)In this investigation, a method presented in a previous paper is applied to the following types of shallow shells: (1) Elliptic paraboloid; (2) hyperolic paraboloid; (3) hypar; (4) conoidal parabolic; and (5) soap bubble. ... -
Analysis of Shallow Shells with Rectangular Projection: Theory
(American Society of Civil Engineers, 1988)In this investigation, a series solution for the deflection and the stress resultants of shallow shells of any geometry with a rectangular projection is obtained in terms of beam functions on the basis of the Marguerre ... -
Closure to “<i>Hydrodynamic Pressures on Dams with Nonvertical Upstream Face</i>” by Javier Avilés and Francisco J. Sánchez‐Sesma (Oct., 1980, Vol. 112, No. 10)
(American Society of Civil Engineers, 1988) -
Novel Unscented Kalman Filter for Health Assessment of Structural Systems with Unknown Input
(American Society of Civil Engineers, 2015)A novel procedure for structural health assessment, denoted as unscented Kalman filter with unknown input (UKF-UI), is proposed using the nonlinear system identification concept. To increase its implementation potential, ... -
Discussion of “<i>Hydrodynamic Pressures on Dams with Nonvertical Upstream Face</i>” by Javier Avilés and Francisco J. Sánchez‐Sesma (Oct., 1980, Vol. 112, No. 10)
(American Society of Civil Engineers, 1988) -
Interval Limit Analysis of Rigid Perfectly Plastic Structures
(American Society of Civil Engineers, 2015)This article presents a novel extended limit analysis approach that determines the sharp maximum and minimum bounds on the collapse load of rigid perfectly plastic structures simultaneously subject to uncertain but bounded ...