Now showing items 2021-2040 of 7001

    • Turbulence Dissipation in Stirred Jars 

      I. P. De Silva (American Society of Civil Engineers, 2006)
      A two-compartment analytical model was developed to estimate the turbulent dissipation rates in a standard jar stirred by a radial impeller. A simple numerical simulation was also performed to support the analytical ...
    • Simulation of Crack Propagation in Asphalt Concrete Using an Intrinsic Cohesive Zone Model 

      Seong Hyeok Song; Glaucio H. Paulino; William G. Buttlar (American Society of Civil Engineers, 2006)
      This is a practical paper which consists of investigating fracture behavior in asphalt concrete using an intrinsic cohesive zone model (CZM). The separation and traction response along the cohesive zone ahead of a crack ...
    • Short-Term Structural Instability under Random Dynamic Loads 

      M. Dimentberg; D. Iourtchenko; A. Naess (American Society of Civil Engineers, 2006)
      In the technical note a single-degree-of-freedom system with stationary random temporal variations of its stiffness is considered. The problem of short-term instability is studied. The analysis is based on a parabolic ...
    • Galerkin Solution for Linear Stochastic Algebraic Equations 

      Mircea Grigoriu (American Society of Civil Engineers, 2006)
      Algebraic equations with random coefficients, referred to as stochastic algebraic equations, are used extensively to solve approximately differential equations describing mechanics problems with uncertain material properties ...
    • Full Two-Dimensional Model for Rolling Resistance: Hard Cylinder on Viscoelastic Foundation of Finite Thickness 

      Xiangjun Qiu (American Society of Civil Engineers, 2006)
      A new full two-dimensional semianalytical method is developed to rigorously and efficiently solve the problem of a rigid cylinder rolling with any given constant speed over a viscoelastic foundation of finite thickness. ...
    • Effect of Contact Force Models on Granular Flow Dynamics 

      Shunying Ji; Hayley H. Shen (American Society of Civil Engineers, 2006)
      The contact force model consisting of a linear spring dashpot with a frictional glider has been widely adapted to simulate granular flows. Real contact mechanics between two solid bodies is very complicated. Extensive ...
    • Analyses of Heated Concrete Spalling due to Restrained Thermal Dilation: Application to the “Chunnel” Fire 

      Y. Msaad; G. Bonnet (American Society of Civil Engineers, 2006)
      Two spalling mechanisms are generally quoted in the literature. The first one is due to pore pressure buildup. The second one, which is analyzed in this paper, is generated by restrained thermal dilation. We seek to model ...
    • Shear-Flexural Buckling of Cantilever Columns under Uniformly Distributed Load 

      M. C. Bakker (American Society of Civil Engineers, 2006)
      Approximate buckling formulas for shear–flexural buckling of cantilever columns subjected to a uniformly distributed load are derived, based on Timoshenko’s energy method. In this method the deflection curve at buckling ...
    • Fracture Mechanics Based Model for Joints under Cyclic Loading 

      Eric Puntel; Gabriella Bolzon; Victor E. Saouma (American Society of Civil Engineers, 2006)
      A generalized interface model for joints and cracks in quasi-brittle materials is formulated. The proposed model marries an existing fracture mechanics based one developed for monotonic loading of concrete with another ...
    • Nonlinear Analysis of Reinforced Concrete Beam–Columns with Bond-Slip 

      Ashraf Ayoub (American Society of Civil Engineers, 2006)
      This paper presents a new model for nonlinear analysis of reinforced concrete beam–columns with bond–slip. The model is derived from a two-field mixed formulation with independent approximation of forces and displacements. ...
    • Turbulent Boundary Layer Flows Above a Porous Surface Subject to Flow Injection 

      Pengzhi Lin; S. A. Karunarathna (American Society of Civil Engineers, 2006)
      A new analytical expression for velocity profile in a fully developed turbulent boundary layer above a porous surface subject to flow injection is derived by solving the coupled Reynolds equations and turbulent kinetic ...
    • Axisymmetric Nonlinear Stability of a Shallow Conical Shell with a Spherical Cap of Arbitrary Variable Shell Thickness 

      Chao-Sheng Hou; Yue Yin; Cheng-Bo Wang (American Society of Civil Engineers, 2006)
      The axisymmetric nonlinear stability of a shallow conical shell with a spherical cap was studied using the point collocation method with the cubic B-spline function as a trial function. Formulas were set up to consider ...
    • Elastic Constants Identification of Composite Materials Using Single Angle-Ply Laminate 

      C. M. Chen; T. Y. Kam (American Society of Civil Engineers, 2006)
      A method is presented for identification of elastic constants for composite materials using three measured strains of a single angle-ply laminate subjected to tensile testing. In the proposed method, the trial material ...
    • Size Effect on Strength of Quasibrittle Structures with Reentrant Corners Symmetrically Loaded in Tension 

      Zdeněk P. Bažant; Qiang Yu (American Society of Civil Engineers, 2006)
      The effect of V-notches (or reentrant corners) on fracture propagation has been analyzed for brittle materials, but not for quasibrittle materials such as concrete, marked by a large material characteristic length producing ...
    • Revisiting Multimode Coupled Bridge Flutter: Some New Insights 

      Xinzhong Chen; Ahsan Kareem (American Society of Civil Engineers, 2006)
      Better understanding of the bimodal coupled bridge flutter involving fundamental vertical bending and torsional modes offers valuable insight into multimode coupled flutter, which has primarily been the major concern in ...
    • On the Comparison of Timoshenko and Shear Models in Beam Dynamics 

      Noël Challamel (American Society of Civil Engineers, 2006)
      The classical Timoshenko beam model and the shear beam model are often used to model shear building behavior both for stability or dynamic analysis. This technical note questions the theoretical relationship between both ...
    • Damage Theory Based on Composite Mechanics 

      Yunping Xi; Morteza Eskandari-Ghadi; Suwito; Stein Sture (American Society of Civil Engineers, 2006)
      A new theory of composite damage mechanics is developed. A material with damage is considered as a composite comprised of two different phases (called matrix and inclusion). Both phases are linearly elastic isotropic ...
    • Force Identification Based on Sensitivity in Time Domain 

      Z. R. Lu; S. S. Law (American Society of Civil Engineers, 2006)
      A new method is proposed for identifying the time history of the input excitation using the dynamic response of the structure. The sensitivities of dynamic response with respect to the parameters of the input force are ...
    • Microvoid Damage Model with Material Dilation for Ductile Fracture 

      H. A. Khoo; T. M. Hrudey; J. J. R. Cheng (American Society of Civil Engineers, 2006)
      A constitutive model that incorporates material dilation and the concept of continuum damage mechanics is developed to predict ductile fracture of steel under monotonic quasi-static loading due to microvoids. In this model, ...
    • Efficacy of Hilbert and Wavelet Transforms for Time-Frequency Analysis 

      T. Kijewski-Correa; A. Kareem (American Society of Civil Engineers, 2006)
      Two independently emerging time-frequency transformations in Civil Engineering, namely, the wavelet transform and empirical mode decomposition with Hilbert transform