Journal of Engineering Mechanics: Recent submissions
Now showing items 2001-2020 of 7001
-
Upsetting Tests of Fresh Cementitious Composites for Extrusion
(American Society of Civil Engineers, 2006)Upsetting tests were conducted on cylindrical specimens made of a typical fresh short fiber-reinforced cementitious composite (SFRCC) paste for extrusion at various boundary conditions to derive the paste’s constitutive ... -
Fully Nonlinear Boussinesq-Type Equations for Waves and Currents over Porous Beds
(American Society of Civil Engineers, 2006)The paper introduces a complete set of Boussinesq-type equations suitable for water waves and wave-induced nearshore circulation over an inhomogeneous, permeable bottom. The derivation starts with the conventional expansion ... -
Numerical Simulation of Solitary Waves Using Velocity–Vorticity Formulation of Navier–Stokes Equations
(American Society of Civil Engineers, 2006)This paper presents the development of a novel numerical scheme to study solitary wave phenomena using velocity–vorticity formulation instead of the primitive variable (velocity-pressure) form for the Navier–Stokes equations. ... -
Thermomechanical Postbuckling Analysis of Cross-Ply Laminated Cylindrical Shell Panels
(American Society of Civil Engineers, 2006)The postbuckling analysis of symmetric and antisymmetric cross-ply laminated cylindrical shell panels subjected to thermomechanical loading is examined in this paper. The formulation is based on an extension of Reissner’s ... -
New Approach to Designing Multilayer Feedforward Neural Network Architecture for Modeling Nonlinear Restoring Forces. II: Applications
(American Society of Civil Engineers, 2006)Based on the basic formulation developed in a companion paper, the writers now present the application of an artificial neural network approach to designing streamlined network models to simulate and identify the nonlinear ... -
Natural Frequencies of a Structure with Bounded Uncertainty
(American Society of Civil Engineers, 2006)Frequency analysis of a structural system with bounded uncertainty is presented. An interval (set-theoretic) formulation is used to quantify the uncertainty present in the structure’s parameters such as material properties. ... -
Elastic Buckling of Laminated Conical Shells Using a Hierarchical High-Fidelity Analysis Procedure
(American Society of Civil Engineers, 2006)A hierarchical high-fidelity analysis procedure is adopted for predicting the critical buckling load of filament wound laminated conical shells. This hierarchical procedure includes three levels of fidelity for the analysis. ... -
Mechanical Model for Unbonded Seven-Wire Tendon with Single Broken Wire
(American Society of Civil Engineers, 2006)This paper presents the derivation and experimental validation of a mechanical model for unbonded seven-wire prestressing tendons with a single broken outer wire. The model has practical significance because corrosion of ... -
Green’s Function of the Linearized de Saint-Venant Equations
(American Society of Civil Engineers, 2006)We derive and discuss the Green’s function of the linearized de Saint-Venant equations (LSVEs) for shallow water waves in channels and rivers. The analysis offers a unified description of previous results on LSVEs regarding, ... -
Closed-Form Stiffness Matrix for the Four-Node Quadrilateral Element with a Fully Populated Material Stiffness
(American Society of Civil Engineers, 2006)This technical note presents closed-form finite-element stiffness formulations for the four-node quadrilateral element with a fully populated material stiffness, which is required for the nonlinear analysis of reinforced ... -
Spatial Stability of Shear Deformable Nonsymmetric Thin-Walled Curved Beams: A Centroid-Shear Center Formulation
(American Society of Civil Engineers, 2006)An improved shear deformable curved beam theory to overcome the drawback of currently available beam theories is newly proposed for the spatially coupled stability analysis of thin-walled curved beams with nonsymmetric ... -
Unified Sand Model Based on the Critical State and Generalized Plasticity
(American Society of Civil Engineers, 2006)Based on the critical state concept and with the use of a state parameter, a unified generalized plasticity model is proposed for sand. The model uses a nonlinear critical state line. The plastic modulus, loading vectors ... -
Innovative Bridge Condition Assessment from Dynamic Response of a Passing Vehicle
(American Society of Civil Engineers, 2006)An innovative approach for damage assessment of a bridge deck is proposed with the measured dynamic response of a vehicle moving on top of a structure. The simply supported bridge deck is modeled as a Euler–Bernoulli beam. ... -
Postbuckling Analysis of Geometrically Imperfect Conical Shells
(American Society of Civil Engineers, 2006)A suitable postbuckling analysis, based on geometrically nonlinear behavior, is developed for arbitrary imperfect conical shells. The conical shell was chosen as a representative case exhibiting the entire range of sensitivity ... -
Failure and Dilatancy Properties of Sand at Relatively Low Stresses
(American Society of Civil Engineers, 2006)Analysis of geotechnical problems concerned by low confinement such as design of shallow foundations and analysis of slope stability and soil liquefaction requires modeling of the soil behavior at low stresses. This note ... -
Multiscale Nonlinear Framework for the Long-Term Behavior of Layered Composite Structures
(American Society of Civil Engineers, 2006)This paper presents an integrated micromechanical–structural framework for local–global nonlinear and time-dependent analysis of fiber reinforced polymer composite materials and structures. The proposed modeling approach ... -
A Stochastic Transformation Field Theory for Heterogeneous Materials
(American Society of Civil Engineers, 2006)The formulation of a stochastic transformation field analysis framework is presented. The theory introduces the statistics of the underlying material microstructure through the incorporation of probability density functions ... -
Compressibility Moduli for Porous Materials Incorporating Volume Fraction
(American Society of Civil Engineers, 2006)Traditional deformation parameters such as drained, unjacketed, and pseudo-bulk compressibilities are developed for a saturated porous medium, assuming they can be uniquely determined by measuring the liquid pressure, ... -
New Approach to Designing Multilayer Feedforward Neural Network Architecture for Modeling Nonlinear Restoring Forces. I: Formulation
(American Society of Civil Engineers, 2006)This paper addresses the modeling problem of nonlinear and hysteretic dynamic behaviors through a constructive modeling approach which exploits existing mathematical concepts in artificial neural network modeling. In ... -
Postbuckling of Moderately Thick Imperfect Rings under External Pressure
(American Society of Civil Engineers, 2006)A fully nonlinear finite-element analysis for postbuckling response of a moderately thick imperfect ring under applied hydrostatic pressure is presented. The fully nonlinear theory employed here, in contrast to the von ...