Now showing items 2121-2137 of 2137

    • Analytical and Experimental Study of Lateral and Distortional Buckling of FRP Wide-Flange Beams 

      Julio F. Davalos; Pizhong Qiao (American Society of Civil Engineers, 1997)
      A combined analytical and experimental evaluation of flexural-torsional and lateral-distortional buckling of fiber-reinforced plastic (FRP) composite wide-flange (WF) beams is presented. Based on energy principles, the ...
    • Testing Methods to Determine Properties of Fiber Reinforced Plastic Panels Used for Reinforcing Glulams 

      D. A. Tingley; Chunxu Gai; E. E. Giltner (American Society of Civil Engineers, 1997)
      The use of fiber reinforced plastic (FRP) panels to reinforce wood and wood composites, particularly glued laminated timber (glulam), has gained acceptance by the wood industry recently. The reinforced glulam exhibits ...
    • Carbon FRP Strengthening of Doubly Curved Precast PC Shell 

      M. Barboni; A. Benedetti; A. Nanni (American Society of Civil Engineers, 1997)
      In this paper a recent rehabilitation project completed in Italy using carbon fiber reinforced plastic (CFRP) unidirectional sheets is examined. This technology was selected for the strengthening of a doubly curved, precast, ...
    • Seismic Retrofit of RC Columns with Continuous Carbon Fiber Jackets 

      Frieder Seible; M. J. Nigel Priestley; Gilbert A. Hegemier; Donato Innamorato (American Society of Civil Engineers, 1997)
      The development, the validation, and the implementation of a new seismic retrofit system for reinforced concrete columns are described. The column jacketing system consists of continuous carbon fiber prepreg tows wound in ...
    • Constructability and Economics of FRP Reinforcement Cages for Concrete Beams 

      Aviad Shapira; Lawrence C. Bank (American Society of Civil Engineers, 1997)
      This paper presents a quantitative economic analysis and a qualitative constructability analysis of three-dimensional fiber-reinforced plastic (FRP) reinforcement cages for concrete beams. Material, labor, and life-cycle ...
    • Behavior of Precracked RC Beams Strengthened with Carbon FRP Sheets 

      Marco Arduini; Antonio Nanni (American Society of Civil Engineers, 1997)
      Experimental data obtained from strengthened, precracked, reinforced concrete (RC) specimens are presented together with the results of material characterization. Strengthening was attained with the adhesion of carbon ...
    • Rational Model for Multibolted Connections for GFRP Members 

      Nahla K. Hassan; Mohamed A. Mohamedien; Sami H. Rizkalla (American Society of Civil Engineers, 1997)
      Bolted connections are most suitable for civil engineering applications since they are easy to inspect, have low construction costs, are easy to manufacture, and offer reliability compared with bonded joints. However, using ...
    • Book Review 

      Unknown author (American Society of Civil Engineers, 1997)
    • Composite Fibers for External Reinforcement of Natural Stone 

      K. E. Kurtis; C. K. H. Dharan (American Society of Civil Engineers, 1997)
      Low tensile strength restricts use of natural stone in applications where tensile or flexural capacity is required, such as for long spans or thin sections (e.g., cladding, countertops, desktops). In addition, exposure to ...
    • Static Behavior of Pultruded GFRP Beams 

      V. Nagaraj; Hota V. S. GangaRao (American Society of Civil Engineers, 1997)
      This paper presents the experimental and theoretical characterizations of mechanical properties of glass fiber reinforced plastic (GFRP) wide flange and box beams. Static response of pultruded beams was studied by conducting ...
    • Editorial 

      Unknown author (American Society of Civil Engineers, 1997)
    • Shear Behavior of URM Retrofitted with FRP Overlays 

      M. R. Ehsani; H. Saadatmanesh; A. Al-Saidy (American Society of Civil Engineers, 1997)
      A large inventory of older masonry buildings exists in earthquake-prone regions. In most cases these buildings contain shear walls constructed of unreinforced masonry. The majority of these buildings were built before any ...
    • ASCE Design Standard for Pultruded Fiber-Reinforced-Plastic (FRP) Structures 

      Richard E. Chambers (American Society of Civil Engineers, 1997)
      This paper presents the results of the first phase of a project to develop a national consensus standard for the design, fabrication, and erection of structures constructed from pultruded fiber-reinforced-plastic structural ...
    • Multibolted Joints for GFRP Structural Members 

      Nahla K. Hassan; Mohamed A. Mohamedien; Sami H. Rizkalla (American Society of Civil Engineers, 1997)
      For the past few decades, aerospace industry was the major user of advanced composite materials. Recently, civil engineers and the construction industry began to realize the potential of these materials in providing remedies ...
    • Behavior and Modeling of Bond of FRP Rebars to Concrete 

      E. Cosenza; G. Manfredi; R. Realfonzo (American Society of Civil Engineers, 1997)
      In the field of reinforced-concrete (RC) structures, the use of fiber reinforced plastic rebars (FRP rebars) as an alternative to the steel reinforcements appears very promising, especially if such structures are exposed ...
    • Editorial 

      Unknown author (American Society of Civil Engineers, 1997)
    • Prestressed Glued-Laminated Timber Beam—Pilot Study 

      C. W. Dolan; T. L. Galloway; A. Tsunemori (American Society of Civil Engineers, 1997)
      The performance of glued-laminated (glulam) timber beams may be improved by the addition of high-performance fibers between the laminations. The contribution of the fibers is further enhanced if they are pretensioned prior ...