Now showing items 2101-2120 of 2137

    • Combined FRP Reinforcement and Permanent Formwork for Concrete Members 

      J. E. Hall; J. T. Mottram (American Society of Civil Engineers, 1998)
      Results are presented from 12 beams tested to ultimate failure in four-point bending and having a fiber-reinforced plastic (FRP)-concrete construction of combined tensile reinforcement and permanent formwork. Specifications ...
    • Optimizing Structural Response of Beams Strengthened with GFRP Plates 

      Phalguni Mukhopadhyaya; Narayan Swamy; Cyril Lynsdale (American Society of Civil Engineers, 1998)
      This paper addresses the structural implications when a glass fiber reinforced plastic (GFRP) plate is bonded externally to a reinforced concrete (RC) beam for flexural strengthening. Full-scale beams were tested in the ...
    • Strengthening of Masonry Structures Using Epoxy-Bonded FRP Laminates 

      Thanasis C. Triantafillou (American Society of Civil Engineers, 1998)
      The present study presents a systematic analysis for the short-term strength of masonry walls, strengthened with externally bonded fiber reinforced polymer (FRP) laminates under monotonic out-of-plane bending, in-plane ...
    • Editor's Note 

      Unknown author (American Society of Civil Engineers, 1998)
    • Experimental Results for Full-Scale Composite and Steel Wickets at Smithland Facility 

      Mostafiz Chowdhury; Robert Hall; Pete Hoffman (American Society of Civil Engineers, 1998)
      Experimental results for full-scale composite and steel wickets at the Olmsted Prototype Wicket Dam, Smithland Facility, Smithland, Ky. are compared to evaluate their performance under various flow and operating conditions. ...
    • State of the Practice Review in FRP Composite Piling 

      Magued G. Iskander; Moataz Hassan (American Society of Civil Engineers, 1998)
      There are considerable problems associated with the use of traditional piling materials in corrosive soils and marine environments. The durability of concrete, corrosion of steel, and vulnerability of timber piles to marine ...
    • Fatigue Behavior and Connection Efficiency of Pultruded GFRP Beams 

      V. Nagaraj; Hota V. S. Gangarao (American Society of Civil Engineers, 1998)
      This study describes the fatigue performance of pultruded glass fiber reinforced plastic (GFRP) box and wide flange (WF) beams without and with flexural connections. A total of 51 tests were conducted under cyclic bending ...
    • Effects of FRP Reinforcement Ratio and Concrete Strength on Flexural Behavior of Concrete Beams 

      Michèle Thériault; Brahim Benmokrane (American Society of Civil Engineers, 1998)
      Corrosion of the steel reinforcement in a cold and saline environment leads to the overall deterioration of reinforced concrete structures. To avoid such deterioration, fiber-reinforced polymers (FRP) rebars are used in ...
    • Draft Guidelines for the Acceptance Testing of FRP Posttensioning Tendons 

      Ferdinand S. Rostásy (American Society of Civil Engineers, 1998)
      For posttensioning tendons consisting of prestressing steel in many countries comprehensive mechanical tests for the general acceptance are required. The relevant test rules vary from country to country. The Fédèration ...
    • Carbon Fiber Cement Matrix (CFCM) Overlay System for Masonry Strengthening 

      Holger Kolsch (American Society of Civil Engineers, 1998)
      A strengthening method for existing buildings and particularly for infill masonry walls with bending loading due to earthquakes is presented. The basic idea of the procedure is the application of additional overlays to the ...
    • New Ductile Hybrid FRP Reinforcing Bar for Concrete Structures 

      Harry G. Harris; Win Somboonsong; Frank K. Ko (American Society of Civil Engineers, 1998)
      A new ductile hybrid fiber reinforced polymer (FRP) bar has been developed at Drexel University. This new bar is unique in that it has equivalent bilinear stress-strain characteristics, with a Young's modulus approaching ...
    • Shear Strengthening of RC Beams by Externally Bonded Side CFRP Strips 

      O. Chaallal; M.-J. Nollet; D. Perraton (American Society of Civil Engineers, 1998)
      This paper presents results of an experimental investigation on the response of reinforced concrete beams strengthened in shear using externally applied epoxy-bonded unidirectional carbon-fiber plastic side strips. Three ...
    • Damage Progression in Carbon-Fiber Reinforced Plastic I-Beams 

      Dade Huang; Levon Minnetyan (American Society of Civil Engineers, 1998)
      Damage and fracture progression in carbon-fiber reinforced plastic (CFRP) composite I-beams subject to three point bending are evaluated via computational simulation. An integrated computer code that scales up constituent ...
    • ERRATA 

      Unknown author (American Society of Civil Engineers, 1998)
    • Shear Coefficient in Orthotropic Thin-Walled Composite Beams 

      Bijan Omidvar (American Society of Civil Engineers, 1998)
      The shear coefficient in Timoshenko beam theory is derived for thin-walled beams constructed of orthotropic laminated composite panels and new formulas for the common forms of thin-walled section are presented. The results ...
    • Editor's Note 

      Unknown author (American Society of Civil Engineers, 1998)
    • Design Guidelines of FRP Reinforced Concrete Building Structures 

      Yasuhisa Sonobe; Hiroshi Fukuyama; Tadashi Okamoto; Nagahide Kani; Kouzou Kimura; Katsumi Kobayashi; Yoshihiro Masuda; Yasuhiro Matsuzaki; Shigeru Mochizuki; Tomoya Nagasaka; Akiyuki Shimizu; Hiroyuki Tanano; Masaharu Tanigaki; Masaomi Teshigawara (American Society of Civil Engineers, 1997)
      The “Design Guidelines of FRP Reinforced Concrete Building Structures” was established in 1993 as one of the final outputs of the research committee on fiber-reinforced plastic (FRP) reinforced concrete building structures ...
    • Tensile and Nondestructive Testing of FRP Bars 

      Protasio F. Castro; Nicholas J. Carino (American Society of Civil Engineers, 1998)
      An exploratory study was carried out to support the development of standard test methods for fiber reinforced plastic (FRP) bars for use as concrete reinforcement. The principal objectives were to develop a simple, economical, ...
    • Development of FRP Reinforcement Guidelines for Prestressed Concrete Structures 

      Jeremy M. Gilstrap; Chad R. Burke; Daniel M. Dowden; Charles W. Dolan (American Society of Civil Engineers, 1997)
      Several national programs define the testing protocols and design guidelines for fiber reinforced polymer (FRP) reinforcement in concrete structures. This paper offers a review of these documents, comparing the materials ...
    • Short-Term Behavior and Design of Fiber-Reinforced Polymeric Slender Members under Axial Compression 

      A. Zureick; D. Scott (American Society of Civil Engineers, 1997)
      Presented in this paper are results of an experimental investigation pertaining to the short-term behavior of concentrically loaded fiber-reinforced polymeric composite slender members. Tested members had box and I-shape ...