Now showing items 2021-2040 of 2137

    • Closure to “FRP‐Confined Concrete Model” by Giorgio Monti 

      Giorgio Monti (American Society of Civil Engineers, 2001)
    • FRP-Confined Concrete Model 

      Amir Mirmiran; Aashish Singhvi; Giorgio Monti (American Society of Civil Engineers, 2001)
    • Canadian Bridge Design Code Provisions for Fiber-Reinforced Structures 

      Ayman M. Okeil; Sherif El-Tawil; Mohsen Shahawy; Baidar Bakht; George Al-Bazi; Nemy Banthia; Moe Cheung; Marie-Anne Erki; Martin Faoro; Atsuhiko Machida; Aftab A. Mufti; Kenneth W. Neale; Gamil Tadros (American Society of Civil Engineers, 2001)
    • Characterization of FRP Rods as Near-Surface Mounted Reinforcement 

      Laura De Lorenzis; Antonio Nanni (American Society of Civil Engineers, 2001)
      The use of near surface mounted (NSM) fiber-reinforced polymer (FRP) rods is a promising technology for increasing flexural and shear strength of deficient reinforced concrete (RC) members. As this technology emerges, the ...
    • Ultimate Response of RC Beams Strengthened with CFRP Plates 

      Paul J. Fanning; Oliver Kelly (American Society of Civil Engineers, 2001)
      Poststrengthening and retrofitting is a growing reality, as existing structures are required to meet the demands of modern society. Apart from the need to increase load capacity, upgrading of a structure may be necessitated ...
    • Drivability of Glass FRP Composite Piling 

      Scott A. Ashford; Warrasak Jakrapiyanun (American Society of Civil Engineers, 2001)
      The low impedance of some glass fiber-reinforced polymer (GFRP) composite piles may limit their usefulness as bearing piles for structures due to drivability limitations. The high strength of glass fibers used in their ...
    • Tensile Behavior of FRP Tendons for Prestressed Ground Anchors 

      Burong Zhang; Brahim Benmokrane; Adil Chennouf; Phalguni Mukhopadhyaya; Adel El-Safty (American Society of Civil Engineers, 2001)
      The research work reported in this paper involves investigation of the tensile behavior of fiber-reinforced polymer (FRP) ground anchors. Variables of the tests on the anchor models were anchor fixed length, tendon type, ...
    • Design of Concrete Flexural Members Strengthened in Shear with FRP 

      Thanasis C. Triantafillou; Costas P. Antonopoulos (American Society of Civil Engineers, 2000)
      The present study describes a simple design model for the calculation of the fiber-reinforced polymer (FRP) contribution to the shear capacity of strengthened RC elements according to the design formats of the Eurocode, ...
    • Slenderness Limit for Hybrid FRP-Concrete Columns 

      Amir Mirmiran; Mohsen Shahawy; Thomas Beitleman (American Society of Civil Engineers, 2001)
      Due to confinement effects, concrete-filled fiber-reinforced polymer (FRP) tubes have an enhanced performance comparable to conventionally reinforced concrete members. However, the strength and ductility enhancements may ...
    • Repair of Corrosion-Damaged Columns with FRP Wraps 

      S. J. Pantazopoulou; J. F. Bonacci; S. Sheikh; M. D. A. Thomas; N. Hearn (American Society of Civil Engineers, 2001)
      Corrosion of reinforcement in bridge piers is encouraged by chloride contamination from exposure to marine environment and from deicing salts used in bridges during winter. Because corrosion products generally occupy greater ...
    • New Method for Testing Fiber-Reinforced Polymer Rods under Fatigue 

      M. Reda Adimi; A. Habib Rahman; Brahim Benmokrane (American Society of Civil Engineers, 2000)
      This paper presents a newly developed specimen for testing fiber-reinforced polymer (FRP) composite reinforcements under cyclic loading. In this configuration the FRP rod is completely encased in concrete. The specimen is ...
    • Reviewers of the<b><i> Journal of Composites for Construction</i></b> 

      Unknown author (American Society of Civil Engineers, 2000)
    • Concrete Beams Strengthened with Externally Bonded FRP Plates 

      Hamid Rahimi; Allan Hutchinson (American Society of Civil Engineers, 2001)
      The structural behavior of reinforced concrete beams strengthened with adhesively bonded fiber-reinforced plastics (FRP) is presented. The experimental work included flexural testing of 2.3-m-long concrete beams with bonded ...
    • Interface Shear Stress: A New Design Criterion for Plate Debonding 

      Phalguni Mukhopadhyaya; Narayan Swamy (American Society of Civil Engineers, 2001)
      This paper critically assesses the applicability and reliability of existing analytical techniques to predict and/or prevent brittle plate debonding failure that occurs in reinforced concrete (RC) beams strengthened with ...
    • Flexural Performance of Concrete Beams Reinforced with FRP Grids 

      Joseph Robert Yost; Charles H. Goodspeed; Edwin R. Schmeckpeper (American Society of Civil Engineers, 2001)
      This paper evaluates the flexural performance of simply supported concrete beams subjected to four-point monotonic loading and reinforced with a 2D fiber-reinforced plastic (FRP) grid. The main parameter of the study is ...
    • Editor's Note 

      Lawrence C. Bank, Editor-in-Chief (American Society of Civil Engineers, 2001)
    • Brittle Failure and Bond Development Length of CFRP-Concrete Beams 

      Dai Minh Nguyen; Toong Khuan Chan; Hee Kiat Cheong (American Society of Civil Engineers, 2001)
      The performance of a series of 1.5 m-long reinforced concrete beams with CFRP plates bonded to the soffit is presented. Effects of the plate length, the reinforcing steel ratio, and the thickness of the concrete cover on ...
    • Concrete Slabs Reinforced with FRP Grids. I: One-Way Bending 

      Stijn Matthys; Luc Taerwe (American Society of Civil Engineers, 2000)
      Currently, considerable interest exists in the use of fiber-reinforced polymer (FRP) reinforcement for concrete structures. Due to the generally lower modulus of elasticity of FRP in comparison with steel and the linear ...
    • Editor's Note 

      Lawrence C. Bank (American Society of Civil Engineers, 2000)
    • Concrete Slabs Reinforced with FRP Grids. II: Punching Resistance 

      Stijn Matthys; Luc Taerwe (American Society of Civil Engineers, 2000)
      The use of fiber-reinforced polymer (FRP) grid reinforcement for concrete slabs has been investigated, considering the behavior of the slabs in one-way bending and under concentrated loading. The behavior under the latter ...