Journal of Composites for Construction: Recent submissions
Now showing items 1861-1880 of 2137
-
Fatigue Behavior of Carbon Fiber Reinforced Polymer-Strengthened Reinforced Concrete Bridge Girders
(American Society of Civil Engineers, 2004)This study examines the effects of one-dimensional fiber-reinforced polymer (FRP) composite rehabilitation systems on the flexural fatigue performance of reinforced concrete bridge girders. Eight -
Analysis of Test Specimens for Cohesive Near-Bond Failure of Fiber-Reinforced Polymer-Plated Concrete
(American Society of Civil Engineers, 2004)The failure mechanisms of reinforced concrete (RC) members change due to the application of externally bonded fiber-reinforced polymer reinforcement. Although an extensive literature is available describing the failure ... -
Deflection Creep of Pultruded Composite Sheet Piling
(American Society of Civil Engineers, 2004)The time-dependent creep behavior of pultruded composite sheet piling was investigated. Two panels were tested under equally spaced third point bending at a span to depth ratio of 48; one was subject to a constant load of 50% of -
Concrete Contribution to the Shear Resistance of Fiber Reinforced Polymer Reinforced Concrete Members
(American Society of Civil Engineers, 2004)Seven beams were tested in bending to determine the concrete contribution to their shear resistance. The beams had similar dimensions and concrete strength and were reinforced with carbon fiber reinforced polymer bars for ... -
Modeling of Tension-Stiffening Behavior of Reinforced Concrete Ties Strengthened with Fiber Reinforced Plastic Sheets
(American Society of Civil Engineers, 2004)A model to analyze the behavior of reinforced concrete tension ties strengthened with fiber reinforced plastic (FRP) laminates is developed that allows introduction of a nonlinear constitutive relationship for materials ... -
Adhesively Bonded and Translucent Glass Fiber Reinforced Polymer Sandwich Girders
(American Society of Civil Engineers, 2004)An experimental program has been carried out to investigate the structural behavior of adhesively bonded glass fiber reinforced polymer (GFRP) sandwich girders. The girders, conceivable for main spans up to 20 m, are ... -
Strengthening of Openings in One-Way Reinforced-Concrete Slabs Using Carbon Fiber-Reinforced Polymer Systems
(American Society of Civil Engineers, 2004)Six prototype one-way RC slabs with openings were strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) systems and subjected to concentrated line loads. The results were compared to those of a solid ... -
Punching Shear Behavior of Flat Slabs Strengthened with Fiber Reinforced Polymer Laminates
(American Society of Civil Engineers, 2004)The present work reports the test results of seven full-scale reinforced concrete slab-column edge connections strengthened against punching shear using different methods. In this study, three slabs contained openings in ... -
Simplified Shear Design Method for Concrete Beams Strengthened with Fiber Reinforced Polymer Sheets
(American Society of Civil Engineers, 2004)This paper presents a simplified shear design method for reinforced concrete beams strengthened externally with fiber reinforced polymer (FRP) sheets. This design method combines both the strip method and the shear friction ... -
Role of Fiber Reinforced Plastic Sheets in Shear Response of Reinforced Concrete Beams: Experimental and Analytical Results
(American Society of Civil Engineers, 2004)The paper is principally aimed at analyzing the role of externally applied fiber reinforced plastic (FRP) sheets in the shear ultimate behavior of reinforced concrete elements. A theoretical model for predicting the shear ... -
Shear Strengthening Masonry Panels with Sheet Glass-Fiber Reinforced Polymer
(American Society of Civil Engineers, 2004)This paper investigates strengthening masonry walls using glass-fiber reinforced polymer (GFRP) sheets. An experimental research program was undertaken. Both clay and concrete brick specimens were tested, with and without ... -
Repair of Slab–Column Connections Using Epoxy and Carbon Fiber Reinforced Polymer
(American Society of Civil Engineers, 2004)Repair, strengthening, and retrofit of reinforced and prestressed concrete members have become increasingly important issues as the World’s infrastructure deteriorates with time. Buildings and bridges are often in need of ... -
Awards
(American Society of Civil Engineers, 2004) -
Shape Effect on the Performance of Carbon Fiber Reinforced Polymer Wraps
(American Society of Civil Engineers, 2004)At present, fiber reinforced polymer (FRP) composite materials are extensively used to strengthen concrete structures and a main application is wrapping compression members such as building and bridge columns for improved ... -
Shear Strengthening of Reinforced Concrete Deep Beams Using Carbon Fiber Reinforced Polymer Laminates
(American Society of Civil Engineers, 2004)For reinforced concrete beams with the same shear and flexural reinforcements, shear failure is most likely to occur in deep beams rather than in regular beams. Thus, retrofitting of deep beams with shear deficiencies is ... -
Out-of-Plane Strengthening of Unreinforced Masonry Walls with Openings
(American Society of Civil Engineers, 2004)Collapse of unreinforced masonry (URM) walls is the cause of many casualties during extreme loading events. The objective of this current research was to investigate effective and practical approaches for strengthening URM ... -
Fiber Reinforced Polymer Composite–Wood Pile Interface Characterization by Push-Out Tests
(American Society of Civil Engineers, 2004)Structural restoration of spliced or damaged wood piles with fiber reinforced polymer (FRP) composite shells requires that shear forces be transferred between the wood core and the encasing composite shells. When a repaired ... -
Effectiveness of Composites in Earthquake Damage Repair of Reinforced Concrete Flared Columns
(American Society of Civil Engineers, 2004)A method to utilize fiber composites for rapid repair of earthquake damaged flared columns was developed. Two 0.4-scale reinforced concrete columns that had been tested to failure in previous research were used. Both columns ... -
Service Load Effective Compression Flange Width in Fiber Reinforced Polymer Deck Systems Acting Compositely with Steel Stringers
(American Society of Civil Engineers, 2004)This paper reports on the field study of a steel stringer-fiber reinforced polymer (FRP) deck composite bridge in Pennsylvania. The objective of the study is to assess the effective compression flange width in the FRP deck ... -
Numerical Modeling of Concrete Confined by Fiber-Reinforced Composites
(American Society of Civil Engineers, 2004)Lateral confinement of reinforced concrete columns can significantly increase their lateral deflection capability and load-carrying capacity. While such retrofits were initially completed using steel jackets, fiber-reinforced ...