Journal of Composites for Construction: Recent submissions
Now showing items 1821-1840 of 2137
-
Flexural Response of Steel Beams Strengthened with Partial-Length CFRP Plates
(American Society of Civil Engineers, 2005)This paper presents the flexural behavior of rolled steel beams that were strengthened with partial-length, adhesive-bonded carbon fiber-reinforced polymer (CFRP) plates. The hybrid beams had two types of failure mode, ... -
Shear Retrofit of Hollow Bridge Piers with Carbon Fiber-Reinforced Polymer Sheets
(American Society of Civil Engineers, 2005)Hollow bridge piers are currently being used in high-speed rail and highway projects in Taiwan. The flexural ductility and shear capacity of such piers with the configuration of lateral reinforcement used in Taiwan has ... -
Interface Characteristics and Laboratory Constructability Tests of Novel Fiber-Reinforced Polymer/Concrete Piles
(American Society of Civil Engineers, 2005)Conventional pile materials such as steel, concrete, and timber are prone to deterioration for many reasons. Fiber-reinforced polymer (FRP) concrete composites represent an alternative construction material for deep ... -
Bond Strength of Fiber Reinforced Polymer Rebars in Normal Strength Concrete
(American Society of Civil Engineers, 2005)The bond behavior of reinforcing bars in concrete is a critical issue in the design of reinforced concrete structures. This study focuses on the bond strength of fiber reinforced polymer (FRP) rebars in normal strength ... -
Anchorage of Reinforced Concrete Parapets on Glass Fiber Reinforced Polymer Bridge Decks
(American Society of Civil Engineers, 2005)An experimental investigation was conducted to develop an effective means of connecting glass fiber reinforced polymer (FRP) bridge decks to conventional reinforced concrete parapets. Six full-scale subassemblies were ... -
Computer-Based Mathematical Model for Performance Prediction of Corroded Beams Repaired with Fiber Reinforced Polymers
(American Society of Civil Engineers, 2005)A new mathematical model for predicting the inelastic flexural response of corroded reinforced concrete (RC) beams repaired with fiber reinforced polymer (FRP) laminates is presented. The model accounts for the effect of ... -
Carbon-Fiber-Reinforced Polymer Repair to Extend Service Life of Corroded Reinforced Concrete Beams
(American Society of Civil Engineers, 2005)This paper presents the results of an experimental study designed to investigate the viability of using externally bonded carbon-fiber-reinforced polymer (CFRP) laminates to extend the service life of corroded reinforced ... -
Experimental Investigation of Cyclic Behavior of Concrete-Filled Fiber Reinforced Polymer Tubes
(American Society of Civil Engineers, 2005)Concrete-filled fiber reinforced polymer (FRP) tubes (CFFT) have in the last decade been used as girders, beam columns, and piles. The focus of research, however, has been exclusively on their monotonic behavior, with ... -
Tests on Seismically Damaged Reinforced Concrete Walls Repaired and Strengthened Using Fiber-Reinforced Polymers
(American Society of Civil Engineers, 2005)The behavior of six 1:2.5-scale reinforced concrete cantilever wall specimens having an aspect ratio of 1.5, tested to failure and subsequently repaired and strengthened using fiber-reinforced polymer (FRP) sheets is ... -
Peeling Behavior and Spalling Resistance of Bonded Bidirectional Fiber Reinforced Polymer Sheets
(American Society of Civil Engineers, 2005)This paper presents the peeling behavior and spalling resistant effect of bidirectional fiber reinforced polymer (FRP) sheets externally bonded to concrete surfaces. Experimental investigations are carried out through a ... -
Concrete Beams Exposed to Live Loading during Carbon Fiber Reinforced Polymer Strengthening
(American Society of Civil Engineers, 2005)The need for structural rehabilitation of concrete structures all over the world is well known. Extensive amounts of research have been carried out and are ongoing in this field. Most of the laboratory research has been ... -
Long-Term Performance Monitoring of the Tech 21 All-Composite Bridge
(American Society of Civil Engineers, 2005)Tech 21 is the third all-composite vehicular bridge installed in the United States. The deck has sandwich configuration with a center core made by bonding orthotropic fiberglass and polyester tubes. The three trapezoidal ... -
Editor's Note
(American Society of Civil Engineers, 2005) -
Flexural Response of Reinforced Concrete Beams Strengthened with End-Anchored Partially Bonded Carbon Fiber-Reinforced Polymer Strips
(American Society of Civil Engineers, 2005)This paper presents the results of experimental and analytical studies carried out to investigate the flexural behavior of reinforced concrete beams strengthened with end-anchored partially bonded carbon fiber-reinforced ... -
Rational Approach to Shear Design in Fiber-Reinforced Polymer-Prestressed Concrete Structures
(American Society of Civil Engineers, 2005)The use of plasticity-based shear design methods for fiber-reinforced polymer (FRP) reinforced and prestressed concrete, as they are used at present, is inappropriate in the long term. In particular, the use of a ... -
Masonry Confinement with Fiber-Reinforced Polymers
(American Society of Civil Engineers, 2005)The application of fiber-reinforced polymer (FRP) as a means of increasing the axial capacity of masonry through confinement, a subject not addressed before, is investigated in this study. Four series of uniaxial compression ... -
Shear Strengthening of Reinforced Concrete Beams Using Carbon-Fiber-Reinforced Polymer Laminates
(American Society of Civil Engineers, 2005)Shear failure is catastrophic and occurs usually without advance warning; thus it is desirable that the beam fails in flexure rather than in shear. Many existing reinforced concrete (RC) members are found to be deficient ... -
Statistical Lifetime Predictions for Aramid Fibers
(American Society of Civil Engineers, 2005)This paper investigates the statistical procedures that can be used to analyze stress rupture data for aramid yarns, with a view to making reasonable predictions for the allowable prestress levels in parallel-lay ropes or ... -
Shear Strength of One-Way Concrete Slabs Reinforced with Fiber-Reinforced Polymer Composite Bars
(American Society of Civil Engineers, 2005)This paper evaluates the shear strength of one-way concrete slabs reinforced with different types of fiber-reinforced polymer (FRP) bars. A total of eight full-size slabs were constructed and tested. The slabs were -
Behavior of Aramid Fiber-Reinforced Polymer Reinforced High Strength Concrete Beams under Bending
(American Society of Civil Engineers, 2005)Flexural test results of ten high strength concrete beams reinforced with aramid fiber-reinforced polymer (AFRP) bars together with a steel-reinforced beam that served as a reference are presented and discussed. All beams ...