Now showing items 1601-1620 of 2137

    • New Approach for Estimating the Deflection of Beams Reinforced with FRP Reinforcement 

      Hugues Vogel; Dagmar Svecova (American Society of Civil Engineers, 2008)
      Due to concerns with corrosion, the use of fiber-reinforced polymer (FRP) as a replacement to conventional steel reinforcement has greatly increased over the last decade. Researchers have identified the distinctive mechanical ...
    • Design Considerations of Carbon Fiber Anchors 

      Sarah L. Orton; James O. Jirsa; Oguzhan Bayrak (American Society of Civil Engineers, 2008)
      Carbon fiber-reinforced polymer (CFRP) sheets can be used to strengthen existing reinforced concrete members. However, debonding (separation of the CFRP sheet from the concrete surface) may occur at less than 50% of CFRP ...
    • Tensile Capacity of GFRP Postinstalled Adhesive Anchors in Concrete 

      Ehab A. Ahmed; Ehab F. El-Salakawy; Brahim Benmokrane (American Society of Civil Engineers, 2008)
      This paper presents the results of an experimental study conducted on the pullout capacity of glass fiber reinforced polymer (GFRP) postinstalled adhesive anchors embedded in concrete. A total of 90 adhesive anchors were ...
    • Structural Performance of RC Beams Poststrengthened with Carbon, Aramid, and Glass FRP Systems 

      Mônica Garcez; Leila Meneghetti; Luiz Carlos da Silva Filho (American Society of Civil Engineers, 2008)
      The use of fiber-reinforced polymers (FRPs) to poststrengthen concrete structures started to be investigated in the mid-1970s and today is widely recognized as an attractive technique to be used in civil structures, ...
    • Cracking Characteristics of RC Beams Strengthened with FRP System 

      Kiang Hwee Tan; Mithun Kumar Saha (American Society of Civil Engineers, 2008)
      The cracking characteristics of fiber-reinforced polymer (FRP) strengthened reinforced concrete (RC) beams in both the short- and long-term is addressed in this paper. First, an empirical equation based on regression ...
    • 3D Finite-Element Analysis of Substandard RC Columns Strengthened by Fiber-Reinforced Polymer Sheets 

      Athanasios I. Karabinis; Theodoros C. Rousakis; Georgia E. Manolitsi (American Society of Civil Engineers, 2008)
      Numerical analyses are performed to predict the stress–strain behavior of square reinforced concrete columns strengthened by fiber-reinforced polymer (FRP) sheet confinement. The research focuses on the contribution of FRP ...
    • Fire Survivability of Externally Bonded FRP Strengthening Systems 

      S. K. Foster; L. A. Bisby (American Society of Civil Engineers, 2008)
      The use of externally-bonded fiber-reinforced polymers (FRPs) to strengthen reinforced concrete (RC) structures is now widely recognized. However, a concern that continues to discourage the use of FRPs in many applications ...
    • Mechanisms of Shear Resistance of Concrete Beams Strengthened in Shear with Externally Bonded FRP 

      Abdelhak Bousselham; Omar Chaallal (American Society of Civil Engineers, 2008)
      In recent years, numerous investigations have addressed the shear strengthening of reinforced concrete (RC) beams with externally bonded fiber-reinforced polymer (FRP) composites. Despite this research effort, the mechanisms ...
    • Fatigue Behavior of Concrete-Filled Fiber-Reinforced Polymer Tubes 

      Iftekhar Ahmad; Zhenyu Zhu; Amir Mirmiran (American Society of Civil Engineers, 2008)
      To date, research on concrete-filled fiber-reinforced polymer (FRP) tubes (CFFT) has focused on the effect of static loads, simulated seismic loads, and long-term sustained loads. Dynamic fatigue behavior of CFFTs, on the ...
    • Analytical Model for FRP-Confined Circular Reinforced Concrete Columns 

      R. Eid; P. Paultre (American Society of Civil Engineers, 2008)
      One disadvantage of most available stress–strain models for concrete confined with fiber-reinforced polymer (FRP) composites is that they do not take into consideration the interaction between the internal lateral steel ...
    • Experimental Response of Externally Retrofitted Masonry Walls Subjected to Shear Loading 

      Pablo Alcaino; Hernan Santa-Maria (American Society of Civil Engineers, 2008)
      Recent earthquakes have produced extensive damage in a large number of existing masonry buildings, demonstrating the need for retrofitting masonry structures. Externally bonded carbon fiber is a retrofitting technique that ...
    • Wedge Anchorage for CFRP Strips 

      S. L. Burtscher (American Society of Civil Engineers, 2008)
      For several decades wedge anchorages have been used with great success for the prestressing of steel strands in civil engineering structures. Due to the anisotropy of carbon fiber-reinforced plastics (CFRP) these wedges ...
    • Flexural Behavior of Reinforced Concrete Beams Strengthened with CFRP Sheets and Epoxy Mortar 

      Byong Y. Bahn; Ronald S. Harichandran (American Society of Civil Engineers, 2008)
      Experiments were conducted to study the effect of using epoxy mortar patch end anchorages on the flexural behavior of reinforced concrete beams strengthened with carbon fiber-reinforced polymer (CFRP) sheets. More specifically, ...
    • Monte Carlo Simulation of Shear Capacity of URM Walls Retrofitted by Polyurea Reinforced GFRP Grids 

      Pedro F. Silva; Piyong Yu; Antonio Nanni (American Society of Civil Engineers, 2008)
      A model proposed in the literature for the evaluation of the in-plane shear capacity of unstrengthened and strengthened concrete and clay brick unreinforced masonry (URM) walls was modified and calibrated following the ...
    • Fracture Mechanics of Plate Debonding 

      P. M. M. Achintha; C. J. Burgoyne (American Society of Civil Engineers, 2008)
      This paper presents a fracture mechanics model to determine the load at which FRP plates will debond from reinforced concrete beams. This will obviate the need for finite-element analyses to be used in situations where ...
    • Structural Concept, Design, and Experimental Verification of a Glass Fiber-Reinforced Polymer Sandwich Roof Structure 

      Thomas Keller; Christoph Haas; Till Vallée (American Society of Civil Engineers, 2008)
      This paper reports on the design and construction of a lightweight glass fiber-reinforced polymer roof structure in Basel, Switzerland. The sandwich construction allowed for an integration of static, building physical and ...
    • Seismic Rehabilitation of Reinforced Concrete Frame Interior Beam-Column Joints with FRP Composites 

      Chris P. Pantelides; Yasuteru Okahashi; L. D. Reaveley (American Society of Civil Engineers, 2008)
      An experimental research program is described regarding the use of externally applied carbon fiber-reinforced plastic (CFRP) jackets for seismic rehabilitation of reinforced concrete interior beam-column joints, which were ...
    • Concrete-Filled Square and Rectangular FRP Tubes under Axial Compression 

      Togay Ozbakkaloglu; Deric J. Oehlers (American Society of Civil Engineers, 2008)
      This paper presents results of an experimental study on the behavior of square and rectangular concrete-filled fiber reinforced polymer (FRP) tubes (CFFTs) under concentric compression. FRP tubes were designed as column ...
    • Shear Transfer across Cracks in FRP Strengthened RC Members 

      M. S. Mohamed Ali; D. J. Oehlers; M. C. Griffith (American Society of Civil Engineers, 2008)
      The shear capacity of unplated reinforced concrete (RC) beams depends on the transverse shear to form the critical diagonal crack (CDC) as well as the transverse shear capacity across the CDC. The latter depends on the ...
    • Modeling of Moisture Diffusion in FRP Strengthened Concrete Specimens 

      Zhenyu Ouyang; Baolin Wan (American Society of Civil Engineers, 2008)
      Modeling the movement and distribution of moisture in the fiber-reinforced polymer (FRP) composites strengthened concrete structure is important because the interfacial adhesion between FRP and concrete is susceptible to ...