Journal of Composites for Construction: Recent submissions
Now showing items 1541-1560 of 2137
-
Anchor System for Tension Testing of Large Diameter GFRP Bars
(American Society of Civil Engineers, 2009)The scope of this paper is to describe the development of an anchor system for tension testing of unidirectional fiber-reinforced plastic bars of large diameter used as reinforcement in concrete structures. The main objective ... -
Strengthening of Brick Masonry Arches with Externally Bonded Steel Reinforced Composites
(American Society of Civil Engineers, 2009)The objective of this study is to investigate the efficiency of an innovative technique for strengthening masonry arches, based on the use of high strength steel cords embedded in either an epoxy (steel reinforced polymer) ... -
Refinement of a Design-Oriented Stress–Strain Model for FRP-Confined Concrete
(American Society of Civil Engineers, 2009)This paper presents the results of a recent study conducted to refine the design-oriented stress–strain model originally proposed by Lam and Teng for fiber-reinforced polymer (FRP)-confined concrete under axial compression. ... -
Effect of Untreated Surface Disbonds on Performance of FRP-Retrofitted Concrete Beams
(American Society of Civil Engineers, 2009)Retrofitting concrete structures with externally bonded fiber-reinforced polymer (FRP) laminates has become an increasingly common practice. Disbonds at the concrete-FRP interface, if left untreated, may adversely affect ... -
Conformable Tire Patch Loading for FRP Composite Bridge Deck
(American Society of Civil Engineers, 2009)Fiber-reinforced polymer (FRP) composites are increasingly being used in bridge deck applications. However, there are currently only fledgling standards to design and characterize FRP deck systems. One area that should be ... -
Modeling of an Unbonded CFRP Strap Shear Retrofitting System for Reinforced Concrete Beams
(American Society of Civil Engineers, 2009)A retrofitting technique has been developed that uses carbon fiber-reinforced polymer (CFRP) straps to increase the shear capacity of reinforced concrete beams. The vertical straps are not bonded to the beam but are instead ... -
CFRP-Based Strengthening Technique to Increase the Flexural and Energy Dissipation Capacities of RC Columns
(American Society of Civil Engineers, 2009)A strengthening technique, combining carbon fiber-reinforced polymer (CFRP) laminates and strips of wet layup CFRP sheet, is used to increase both the flexural and the energy dissipation capacities of reinforced concrete ... -
Novel Technique for Inhibiting Buckling of Thin-Walled Steel Structures Using Pultruded Glass FRP Sections
(American Society of Civil Engineers, 2009)The use of composite materials for strengthening the ailing infrastructure has been steadily gaining acceptance and market share. It can even be stated that this strengthening technique has become main stream in some ... -
Case Study: Seismic Upgrade of a Masonry Bell Tower Using Glass Fiber-Reinforced Polymer Ties
(American Society of Civil Engineers, 2009)In many cases masonry buildings present structural problems related to development of local mechanisms under seismic actions. The solution to this weakness has to be chosen taking into account several aspects if the ... -
Impact Response of Externally Strengthened Unreinforced Masonry Walls Using CFRP
(American Society of Civil Engineers, 2009)Research reported herein investigates the out-of-plane impact resistance of unreinforced masonry (URM) walls strengthened with carbon fiber-reinforced polymer (CFRP) composites, externally applied in sheets to one face of ... -
Performance Evaluation of FRP Composite Deck Considering for Local Deformation Effects
(American Society of Civil Engineers, 2009)We examine here the replacement of a deteriorated concrete deck in the historic Hawthorne Street Bridge in Covington, Va. with a lightweight fiber-reinforced polymer (FRP) deck system (adhesively bonded pultruded tube and ... -
Mechanically Fastened FRP-Strengthened Two-Way Concrete Slabs with and without Cutouts
(American Society of Civil Engineers, 2009)The feasibility of strengthening concrete slabs in flexure, with and without cutouts, using the mechanically fastened (MF) FRP technique is investigated. Two series of large-scale reinforced concrete slabs are tested. The ... -
Interaction between Local and Lateral Buckling on Pultruded I-Beams
(American Society of Civil Engineers, 2009)This paper presents the results of an experimental work involving pultruded beams. The tests developed attempt to observe the interaction between local and global buckling in open-section beams. A modified three-point ... -
Nonlinear Analyses of Tuff Masonry Walls Strengthened with Cementitious Matrix-Grid Composites
(American Society of Civil Engineers, 2009)Previous experimental studies, conducted by some of the authors, on in-plane response of tuff masonry walls strengthened with an innovative cementitious matrix composite grid (CMG) system confirmed that the CMG system could ... -
Shear Failure of Pultruded Fiber-Reinforced Polymer Composites under Axial Compression
(American Society of Civil Engineers, 2009)When structural elements are subjected to compressive loads, the shear forces and stresses induced by second-order effects may lead to shear failure prior to compressive failure. This is particularly likely to occur in the ... -
Influence of Changes in Cross Section on the Effectiveness of Externally Bonded FRP Strengthening
(American Society of Civil Engineers, 2009)There are many situations where strengthening might be required for a nonprismatic reinforced concrete section (i.e., a beam or slab where the depth of the section varies along its length). For example, many bridges in the ... -
Axial Load-Bending Moment Diagrams of Carbon FRP Wrapped Hollow Core Reinforced Concrete Columns
(American Society of Civil Engineers, 2009)Hollow core reinforced concrete columns are generally preferred in use to decrease the cost and weight/stiffnesss ratio of members, such as bridge columns and piles. With a simplified stress state assumption, strengthening ... -
Strengthening RC Beams in Flexure Using New Hybrid FRP Sheet/Ductile Anchor System
(American Society of Civil Engineers, 2009)This paper explores a new hybrid fiber-reinforced polymer (FRP) sheet/ductile anchor system for rehabilitation of reinforced concrete (RC) beams. The advantages of the proposed strengthening method is that it overcomes the ... -
Stress Analysis of Monolithic Circular Arches Strengthened with Composite Materials
(American Society of Civil Engineers, 2009)This paper presents an analytical approach for the elastic stress analysis of monolithic circular arches strengthened with externally bonded fiber-reinforced polymer (FRP) strips. Emphasis is placed on the interfacial ... -
Fatigue Modeling of Concrete-Filled Fiber-Reinforced Polymer Tubes
(American Society of Civil Engineers, 2009)Field applications and laboratory research have shown the feasibility of concrete-filled fiber-reinforced polymer (FRP) tube (CFFT) in bridges. Yet, their widespread applications require developing appropriate design and ...