Journal of Composites for Construction: Recent submissions
Now showing items 1521-1540 of 2137
-
Behavior of Large-Scale Rectangular Columns Confined with FRP Composites
(American Society of Civil Engineers, 2010)This paper focuses on axially loaded, large-scale rectangular RC columns confined with fiber-reinforced polymer (FRP) wrapping. Experimental tests are conducted to obtain the stress-strain response and ultimate load for ... -
State of Research on Seismic Retrofit of RC Beam-Column Joints with Externally Bonded FRP
(American Society of Civil Engineers, 2010)A considerable amount of research has been directed recently toward understanding and promoting the use of externally applied fiber-reinforced polymer (FRP) for the seismic retrofit of reinforced concrete (RC) structures. ... -
Effect of Geometric Discontinuities on Strains in FRP-Wrapped Columns
(American Society of Civil Engineers, 2010)Extensive research on fiber-reinforced polymer (FRP) confinement strengthening for concrete columns has led to a good understanding of, and accurate models for, circular columns subjected to axial load. This research is ... -
Fiber-Reinforced Polymer Retrofitting of Predamaged Substandard RC Prismatic Members
(American Society of Civil Engineers, 2009)An experimental study was conducted to investigate the efficiency of FRP jackets in upgrading the seismic behavior of lightly reinforced concrete prismatic members previously damaged under a combination of axial compression ... -
Tests and Analysis of Cantilevered GFRP Tubular Poles with Partial Concrete Filling
(American Society of Civil Engineers, 2010)In this study, six glass fiber-reinforced polymer (GFRP) cantilevered tubular poles were tested in flexure. Four poles were filled with varying amounts of concrete; within 13, 30, 51, and 72% of their lengths, from the ... -
Numerical Modeling of Concrete-FRP Debonding Using a Crack Band Approach
(American Society of Civil Engineers, 2010)In this study, numerical procedures are proposed to predict the structural behavior of concrete members strengthened with fiber-reinforced polymeric (FRP) sheets or plates. The concept of damage band or crack band is ... -
Seismic Performance Assessment of Damage-Controlled FRP-Retrofitted RC Bridge Columns Using Residual Deformations
(American Society of Civil Engineers, 2009)Despite the improved performance of fiber-reinforced plastic (FRP)-retrofitted bridges, residual deformations in the event of an earthquake are inevitable. Little consideration is currently given to these deformations when ... -
Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester Composite
(American Society of Civil Engineers, 2009)Structural analysis of composite structures subjected to dynamic loads requires detailed knowledge of the mechanical behavior of component materials under high strain-rates. This paper presents the results of tests to ... -
Damage Detection of FRP-Strengthened Concrete Structures Using Capacitance Measurements
(American Society of Civil Engineers, 2009)In this study, a new concept for detecting air voids, water intrusion, and glue infiltration damages in fiber-reinforced polymers (FRPs)-strengthened concrete structures was developed. The concept, based on detecting the ... -
Prediction of Net-Tension Strength for Multirow Bolted Connections of Pultruded Material Using the Hart-Smith Semiempirical Modeling Approach
(American Society of Civil Engineers, 2010)Presented in this paper is a study to show that the Hart-Smith semiempirical modeling approach can be used to predict the net-tension strength of multirowed bolted connections of pultruded material. Using the original 1987 ... -
Behavior of RC Beams Shear Strengthened with Bonded or Unbonded FRP Wraps
(American Society of Civil Engineers, 2009)Reinforced concrete (RC) beams shear-strengthened with fiber-reinforced polymer (FRP) fully wrapped around the member usually fail due to rupture of FRP, commonly preceded by gradual debonding of the FRP from the beam ... -
Are Available Models Reliable for Predicting the FRP Contribution to the Shear Resistance of RC Beams?
(American Society of Civil Engineers, 2009)In this paper the trustworthiness of the existing theory for predicting the fiber-reinforced plastic contribution to the shear resistance of reinforced concrete beams is discussed. The most well-known shear models for ... -
New Approach for Modeling the Contribution of NSM FRP Strips for Shear Strengthening of RC Beams
(American Society of Civil Engineers, 2010)This paper presents the main features of an analytical model recently developed to predict the near-surface mounted (NSM) fiber-reinforced polymer (FRP) strips shear strength contribution to a reinforced concrete (RC) beam ... -
Structural Characterization of Composite Structural Insulated Panels for Exterior Wall Applications
(American Society of Civil Engineers, 2010)Structural sandwich composite panels are extensively used for modular panelized construction. This paper includes the structural characterization of the innovative composite structural insulated panels (CSIPs) developed ... -
Design Proposal to Avoid Peeling Failure in FRP-Strengthened Reinforced Concrete Beams
(American Society of Civil Engineers, 2009)According to the available experimental work, the most common failure in existing structures strengthened by plate bonding is the laminate peeling off. In the last few years, an important effort in the development of ... -
Investigating a Structural Form System for Concrete Girders Using Commercially Available GFRP Sheet-Pile Sections
(American Society of Civil Engineers, 2009)This paper presents a new girder consisting of a trapezoidal pultruded glass fiber-reinforced polymer (GFRP) hat-shaped section commercially available as a sheet pile, but used in this study as a structural form for concrete. ... -
Retrofitting of Rectangular Columns with Deficient Lap Splices
(American Society of Civil Engineers, 2010)The cyclic behavior of eight 0.4-scale reinforced concrete column specimens is investigated. The columns incorporated deficient design details to simulate bridge columns built in Washington State prior to 1971. Two columns ... -
Textile-Reinforced Mortar versus FRP Jacketing in Seismic Retrofitting of RC Columns with Continuous or Lap-Spliced Deformed Bars
(American Society of Civil Engineers, 2009)The effectiveness of a new structural material, namely, textile-reinforced mortar (TRM), was investigated experimentally in this study as a means of confining oldtype reinforced concrete (RC) columns with limited capacity ... -
Model of FRP-Confined Concrete Cylinders in Axial Compression
(American Society of Civil Engineers, 2009)This paper introduces a dilatancy-based analytical model of the response of an axially loaded concrete cylinder, confined with a fiber-reinforced polymer (FRP) composite jacket. Model construction is based on the experimentally ... -
Flexural Behavior of Concrete Beams Reinforced with Hybrid (GFRP and Steel) Bars
(American Society of Civil Engineers, 2009)Reinforcing concrete with a combination of steel and glass fiber-reinforced polymer (GFRP) bars promises favorable strength, serviceability, and durability. To verify its promise and to support design of concrete structures ...