ASCE: Recent submissions
Now showing items 3941-3960 of 107386
-
Performance Optimization and Mechanistic Analysis of Recycling Waste Phosphogypsum into High-Performance Cement
(American Society of Civil Engineers, 2025)Phosphogypsum (PG) is a bulk solid waste generated during the production of phosphoric acid. This study proposes a novel phosphogypsum-based geopolymer (PBG) cement with a 28-day unconfined compressive strength (UCS) ... -
Material Prestraining Effect on Fatigue Performance of Q235 and Q355 Structural Steels
(American Society of Civil Engineers, 2025)The primary difference in fatigue performance between cold-formed steel and hot-rolled steel stems from cold work strengthening. Therefore, this study focuses on the influence of prestraining on the high-cycle fatigue ... -
Aggregate Coated with Carbon Nanotube–Polymer Composites for Smart Asphalt Mixtures with Different Aggregate Gradations
(American Society of Civil Engineers, 2025)The introduction of carbon-based nanomaterials (CNMs) such as graphite powder, carbon nanotubes (CNTs), and graphene directly into asphalt mixtures offers a theoretical feasibility for increasing their electrical and thermal ... -
Yielding of Rockfill under Relative Humidity Control
(American Society of Civil Engineers, 2025)Although rockfill materials are widely used in geotechnical engineering, some aspects of their behavior, with respect to the influence of suction, still raise some questions. This research is an investigation of the effect ... -
Synthesis and Characterization of a High-Performance Asphalt Modified with Lignin–Waste Cooking Oil Composite
(American Society of Civil Engineers, 2025)As one of the most important aromatic renewable natural resources, lignin has the potential to improve the high-temperature rheological properties and antiaging properties of asphalt. However, it will adversely harden the ... -
Macroscopic and Microscopic Evaluation of the Effect of Mellowing Time on the Mechanical Properties of Expansive Clay Stabilized with Class F Fly Ash–Based Geopolymer
(American Society of Civil Engineers, 2025)For construction quality control, the compaction delay referred to as mellowing time (MT) is crucial for achieving the desired outcomes of the chemical soil stabilization process in the field. In the current study, fly ... -
Performance Evaluation of Carboxylated Styrene–Butadiene Latex in Bitumen and in Asphalt Mixtures
(American Society of Civil Engineers, 2025)Restricted by the harsh environmental conditions in cold regions, the construction of polymer-modified asphalt pavement in these areas is usually a process of high emissions of toxic and harmful gas and large energy ... -
Enhancing Asphalt Pavement Durability: Evaluation of Encapsulated Soybean Sludge Rejuvenators for Self-Healing and Cracking Resistance
(American Society of Civil Engineers, 2025)Self-healing of asphalt is a potential way to increase the service life of road surfaces. In the past, scientists have employed various methods to enhance the self-healing abilities of asphaltic materials. One of these ... -
Waste Polyethylene and Polypropylene Particles as Mechanical Reinforcements of Polyester Polymer Mortar: Gamma Radiation as Postcuring Treatment
(American Society of Civil Engineers, 2025)The excessive use of high-density polyethylene (HDPE) and polypropylene (PP) to produce materials with a very short useful life has caused environmental problems due to the lack of sustainable recycling routes and end-use ... -
Effect of NMH and DA Additives and Bitumen Aging on Cohesion and Adhesion Failures Using Surface Free Energy and Pull-Off Methods
(American Society of Civil Engineers, 2025)Moisture damage is closely related to bitumen cohesion and bitumen-aggregate adhesion. Aging is among the factors affecting the occurrence of adhesion and cohesion failure by changing the adhesion and cohesion characteristics ... -
A Laboratory Study on Enhancing Asphalt Mixture Properties through Dry Mixing with High-Dose Multilayer Plastic Packaging Pellet Additives
(American Society of Civil Engineers, 2025)Flexible pavements are typically vulnerable to distresses caused by fluctuating temperatures and heavy traffic loads, leading to permanent deformation, cracking, and other distress types. Researchers have explored various ... -
Fabrication of an Environmentally Friendly Modifier Based on DAh-MT-MoS2 via Codeposition for the Preparation of Composite TB Rubberized Asphalt
(American Society of Civil Engineers, 2025)Adding rubber made from waste tires to asphalt can promote sustainable development of resources on roads. Molybdenum disulfide, as a nanoscale layered solid lubricant, can enhance the compatibility of rubber-modified ... -
Restrained Shrinkage Behavior of High-Strength Concrete with Various Synthetic Fiber and Cellulose Fiber Proportions
(American Society of Civil Engineers, 2025)This study investigated the effect of synthetic fibers, specifically glass fibers (GFs), polypropylene fibers (PPF), and cellulose fibers (CF), derived from wastepaper pulp on the restrained shrinkage and cracking behavior ... -
Exploring Submarine 3D Printing: Enhancing Washout Resistance and Strength of 3D Printable Mortar
(American Society of Civil Engineers, 2025)Underwater three-dimensional (3D) concrete printing has a great potential to be applied in submarine construction, but there tends to be significant dispersion and strength reduction of the printed concrete due to washout ... -
Dynamic Behavior of Stone Column–Improved Soft Clay under Three-Stage Traffic Loads
(American Society of Civil Engineers, 2025)This paper presents the results of a laboratory investigation into the response of stone column–improved soft clay under dynamic traffic load conditions. Six reduced-scale model tests were performed with vertical traffic ... -
Experimental Investigation and Numerical Modeling of Short-Term Mechanical and Creep Properties of Cement Mortar
(American Society of Civil Engineers, 2025)This study conducts several laboratory tests (triaxial compression, cycle loading, and cycle loading creep tests) to explore the degradation mechanism of mechanical properties of cement mortar. The results revealed that ... -
Comprehensive Study of the Properties of Engineered Cementitious Composites Incorporating Synthetic Wollastonite Microfibers
(American Society of Civil Engineers, 2025)In this study, synthetic wollastonite microfibers (SWMs) with a dense acicular particle structure and a very high aspect ratio were developed by using a three-stage production method consisting of the mechanochemical, ... -
Eco-Friendly Concrete: A Dual Surface Modification Approach for Enhanced Mechanical Performance of Recycled Coarse Aggregates
(American Society of Civil Engineers, 2025)This study aims to boost the mechanical performance of eco-friendly concrete by addressing challenges related to recycled coarse aggregates (RCA), particularly aged cement mortar adhering to aggregate surfaces. Employing ... -
Evaluation of the Properties of Mortar Mixed with Multiple Hybrid Functional Materials
(American Society of Civil Engineers, 2025)This study evaluates the fundamental properties (including workability, strength characteristics, and chloride resistance) and durability of mortar mixed with two or more functional materials, including copper powder, ... -
Self-Sensing Carbon Fiber and Graphite–Epoxy Composites: Fabrication and Optimization for Strain-Monitoring Applications
(American Society of Civil Engineers, 2025)Pavements are poorly monitored and repaired only after damage becomes apparent. This study focused on the self-sensing behavior of epoxy based conductive composites that allows the measurement of the strain distribution ...