ASCE: Recent submissions
Now showing items 2161-2180 of 107386
-
Impact of Production Temperatures on Blending Condition between Virgin and Aged Asphalt: Performance and Environmental Cost Analysis
(American Society of Civil Engineers, 2026)AbstractThe application of hot recycled asphalt mixtures has been increasing in practical engineering in recent years. However, due to concerns about the performance of recycled mixtures with high reclaimed asphalt pavement ... -
Preparation and Water Stability of Permeable Polyurethane Mixtures
(American Society of Civil Engineers, 2026)AbstractIn response to the development of “sponge cities,” permeable pavements have been increasingly used in road construction to eliminate the adverse effects caused by traditional pavements. In recent years, permeable ... -
Resistance Mechanism of Hybrid Fiber-Reinforced Tailing Mortar under Freeze–Thaw and Sulfate Attack
(American Society of Civil Engineers, 2026)AbstractThe continuous increase in the emissions of iron ore tailings (IOTs) has caused serious pollution to the environment and raised costly IOT management costs. For protecting the environment and decreasing the economic ... -
Comprehensive Laboratory Testing for Reducing Low-Temperature Cracking of Asphalt Mixtures
(American Society of Civil Engineers, 2026)AbstractThis paper assesses the effects of aggregate, binder, reclaimed asphalt pavement (RAP), and asphalt mixture properties on asphalt roadway low-temperature cracking resistance. A comprehensive laboratory testing ... -
Synergistic Effects of RHA, UFA, and GGBS on Physical, Rheological, Mechanical Properties of Alkali-Activated Grouting Material
(American Society of Civil Engineers, 2026)AbstractAlkali-activated grouting material is a promising grouting material. This study developed a solid waste alkali-activated grouting material using rice husk ash (RHA), ultrafine fly ash (UFA) and ground granulated ... -
Rheological and Fresh-State Characterization for 3D-Printable Concrete: Evaluating Printability across Different Binder Systems
(American Society of Civil Engineers, 2026)AbstractThis study establishes rheological criteria to achieve optimal printability for concrete mixes incorporating various binder systems. The mixtures were evaluated based on critical design parameters for three-dimensional ... -
An Isotach Approach for Considering the Rate-Dependent Axial-Loading Behavior of Open Steel Piles Driven in Chalk
(American Society of Civil Engineers, 2025)Abstract This paper analyzes the effects of loading rate on the axial shaft capacity and stiffness for piles driven in the low-to-medium density chalk, taking advantage of a series of field maintained load (ML) tests. As ... -
Mechanical Performance and Microstructure of Silica Powder–Calcium Binder Systems Fabricated by Binder Jetting 3D Printing
(American Society of Civil Engineers, 2026)AbstractThis study investigates the feasibility of using a silica powder–calcium-based binder material system for binder jetting (BJ) 3D printing of rocklike materials. After particle size grading, silica powder was mixed ... -
Feasibility of Using California-Based Almond Shells for Alkali Activation of Slag: Physicochemical Properties and Hydration Behavior of Almond Ash Binders
(American Society of Civil Engineers, 2026)AbstractThis study investigated the feasibility of using almond shell ash, a byproduct of California’s almond industry, as an alternative alkali source in alkali-activated binders (AABs) based on ground-granulated blast ... -
Development of a Novel Ester-Functionalized PCE and Assessment of Its Impact on Rheology of Cement Paste
(American Society of Civil Engineers, 2026)AbstractThis study examines how varying ester group content in polycarboxylate superplasticizers (PCEs) affects the workability and adaptability of cement paste to external factors. PCE, a high-performance concrete admixture, ... -
Properties of Thermosetting Polyurethane/Nano-TiO2 Composite-Modified Asphalt and Its Mixtures
(American Society of Civil Engineers, 2026)AbstractThis study prepared a composite-modified asphalt to address the challenges of asphalt pavement aging and cracking caused by elevated temperatures and ultraviolet (UV) radiation. The composite includes thermosetting ... -
Diatomite as a Pozzolana Alternative for Soil Stabilization: Investigating Effects in Natural and Lime-Amended Conditions
(American Society of Civil Engineers, 2026)AbstractLime is one of the most researched additives for soil stabilization. Due to their high silica (SiO2) content, pozzolans have also attracted significant attention from researchers in this field. Diatomite, a pozzolan ... -
Design of Functional Chip Seal on Asphalt Pavement with Recycled Steel Slag as Aggregate
(American Society of Civil Engineers, 2026)AbstractSteel slag has witnessed extensive utilization in numerous aspects, and recycling steel slag as aggregate in pavement is the primary way to eliminate it in large quantities. This study developed the heat healing ... -
Alteration of the Pore Structure of Cement Pastes under Extreme Pressures
(American Society of Civil Engineers, 2026)AbstractUnderstanding the behavior of cementitious material under extreme loading is vital for the dynamic design of structures. In such conditions, deformations are confined, and compression is accompanied by pore closure ... -
Experimental Study of Cyclic Loading and Unloading Creep of Hydraulic Concrete: A Statistical Perspective
(American Society of Civil Engineers, 2026)AbstractConcrete is a complex composite material. Even if hydraulic concrete is creep-tested under uniform test conditions, the magnitude relationship between the tensile and compressive creep properties of concrete is ... -
Freeze–Thaw Durability of a High-Plasticity Clay Treated with Polymeric Binder and Waste Fibrous Materials
(American Society of Civil Engineers, 2026)AbstractHigh-plasticity soils are highly susceptible to degradation given freeze-thaw (F-T) cycles, particularly in cold climates. Stabilizing these soils with sustainable polymeric binders and reinforcing them with fibrous ... -
Study of Mechanical Properties and Constitutive Relationship of ES-UHPC under Uniaxial Tension
(American Society of Civil Engineers, 2026)AbstractEarly-strength ultrahigh performance concrete (ES-UHPC) is used widely in road repair, as well as in emergency rescue and disaster relief operations. Previous studies focused primarily on the mechanical properties ... -
Stochastic Stability and Failure Mechanism of Embankments Supported by Deep Mixing Columns Considering Anisotropic Spatial Variability in Clay Shear Strength
(American Society of Civil Engineers, 2025)Abstract Deep mixing (DM) columns are widely used to enhance soft soil beneath embankments. These columns are subject to vertical compression and horizontal pressure, developing multiple failure mechanisms, including ... -
Effect of Heat, Oxygen, and UV Light Coupled Aging on Chemical Properties of Bitumen
(American Society of Civil Engineers, 2026)AbstractThe properties of bitumen can deteriorate under environmental aging. In this study, heat-, oxygen-, and ultraviolet (UV) light–induced aging of bitumen was carried out using an environmental coupled aging simulator. ... -
Virgin Asphalt–Aged Asphalt Interface Diffusion Behavior: Molecular Dynamics Simulation and GPC Test Validation
(American Society of Civil Engineers, 2026)AbstractReclaimed asphalt pavements (RAP) with reutilizing aged binders is very topical given their economic benefits. In particular, hot central-plant recycled technology is commonly used nowadays. In the hot recycled ...