Show simple item record

dc.contributor.authorForghan, Fariborz
dc.contributor.authorAskari, Omid
dc.contributor.authorNarusawa, Uichiro
dc.contributor.authorMetghalchi, Hameed
dc.date.accessioned2017-05-09T01:27:56Z
dc.date.available2017-05-09T01:27:56Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.othersol_138_04_044502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160949
dc.description.abstractTurbine blade surfaces are cooled by jet flow from expanded exit holes (EEHs) against the prevailing hot gas flow. The flow through EEH must be designed to form a film of cool air over the blade. Computational analyses are performed to examine the cooling effectiveness of flow from EEH over the suction side of a blade by solving conservation equations and the ideal gas equation of state for turbulent and compressible flow. For a sufficiently high coolant mass flow rate, the flow through EEH, which acts as a converging–diverging nozzle, is choked at the nozzle throat, resulting in a supersonic flow, a shock, and then a subsonic flow downstream. The location of the shock relative to the hightemperature gas flow determines the temperature distribution along the blade surface; which is analyzed in detail when the following conditions are varied: coolant mass flow rate, the temperature difference between gasand coolantflow, EEH location on the blade surface, EEH inclination angle to the blade surface, and exittoinlet area ratio (AR) of EEH. The film cooling effectiveness is calculated along the surface of the blade. The results show (1) increasing the coolant flow rate improves the effectiveness, (2) change in temperature difference between the mainstream and the coolant slightly affects the effectiveness, (3) inclination angle of EEH has a pronounced effect on film cooling and the corresponding effectiveness, (4) both the location of the EEH on a blade and the AR of the EEH slightly change the effectiveness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCooling of Turbine Blade Surface With Expanded Exit Holes: Computational Suction Side Analysis
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue5
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4033590
dc.journal.fristpage51602
dc.journal.lastpage51602
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record