• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Cooling of Turbine Blade Surface With Expanded Exit Holes: Computational Suction Side Analysis

    Thumbnail
    View/Open
    sol_138_04_044502.pdf (995.5Kb)
    Date
    2016
    Author
    Forghan, Fariborz
    Askari, Omid
    Narusawa, Uichiro
    Metghalchi, Hameed
    Metadata
    Show full item record
    Abstract
    Turbine blade surfaces are cooled by jet flow from expanded exit holes (EEHs) against the prevailing hot gas flow. The flow through EEH must be designed to form a film of cool air over the blade. Computational analyses are performed to examine the cooling effectiveness of flow from EEH over the suction side of a blade by solving conservation equations and the ideal gas equation of state for turbulent and compressible flow. For a sufficiently high coolant mass flow rate, the flow through EEH, which acts as a converging–diverging nozzle, is choked at the nozzle throat, resulting in a supersonic flow, a shock, and then a subsonic flow downstream. The location of the shock relative to the hightemperature gas flow determines the temperature distribution along the blade surface; which is analyzed in detail when the following conditions are varied: coolant mass flow rate, the temperature difference between gasand coolantflow, EEH location on the blade surface, EEH inclination angle to the blade surface, and exittoinlet area ratio (AR) of EEH. The film cooling effectiveness is calculated along the surface of the blade. The results show (1) increasing the coolant flow rate improves the effectiveness, (2) change in temperature difference between the mainstream and the coolant slightly affects the effectiveness, (3) inclination angle of EEH has a pronounced effect on film cooling and the corresponding effectiveness, (4) both the location of the EEH on a blade and the AR of the EEH slightly change the effectiveness.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/160949
    Collections
    • Journal of Energy Resources Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV