Show simple item record

dc.contributor.authorShim, Do
dc.contributor.authorXu, Steven
dc.contributor.authorKerr, Matthew
dc.date.accessioned2017-05-09T01:22:55Z
dc.date.available2017-05-09T01:22:55Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_01_011403.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159430
dc.description.abstractRecent studies have shown that the crack growth of primary water stress corrosion cracking (PWSCC) is mainly driven by the weld residual stress (WRS) within the dissimilar metal weld. The existing stress intensity factor (K) solutions for surface cracks in pipe typically require a fourth order polynomial stress distribution through the pipe wall thickness. However, it is not always possible to accurately represent the through thickness WRS with a fourth order polynomial fit and it is necessary to investigate the effect of the WRS fitting on the calculated Ks. In this paper, two different methods were used to calculate the K for a semielliptical circumferential surface crack in a pipe under a given set of simulated WRS. The first method is the universal weight function method (UWFM) where the through thickness WRS distribution is represented as a piecewise monotonic cubic fit. In the second method, the through thickness WRS profiles are represented as a fourth order polynomial curve fit (both using the entire wall thickness data and only using data up to the cracktip). In addition, threedimensional finite element (FE) analyses (using the simulated weld residual stress) were conducted to provide a reference solution. The results of this study demonstrate the potential sensitivity of Ks to fourth order polynomial fitting artifacts. The piecewise WRS representations used in the UWFM were not sensitive to these fitting artifacts and the UWFM solutions were in good agreement with the FE results. In addition, in certain cases, it was demonstrated that more accurate crack growth calculations of PWSCC are made when the UWFM is used.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Weld Residual Stress Fitting on Stress Intensity Factor for Circumferential Surface Cracks in Pipe
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4027430
dc.journal.fristpage11403
dc.journal.lastpage11403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record