Show simple item record

dc.contributor.authorMoreno, Gilberto
dc.contributor.authorJeffers, Jana R.
dc.contributor.authorNarumanchi, Sreekant
dc.date.accessioned2017-05-09T01:09:42Z
dc.date.available2017-05-09T01:09:42Z
dc.date.issued2014
dc.identifier.issn0022-1481
dc.identifier.otherht_136_10_101502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/155381
dc.description.abstractA study was conducted to experimentally characterize the pool boiling performance of hydrofluorocarbon HFC245fa at pressures ranging from 0.15 MPa to 1.1 MPa (reduced pressure range: 0.04–0.31). Pool boiling experiments were conducted using horizontally oriented 1cm2 heated surfaces to quantify the effects of pressure and a microporousenhanced coating on heat transfer coefficients and critical heat flux (CHF) values. Results showed that the coating enhanced heat transfer coefficients and CHF by 430% and 50%, respectively. The boiling heat transfer performance of HFC245fa was then compared with the boiling performance of HFC134a and hydrofluoroolefin HFO1234yf.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Pressure and a Microporous Coating on HFC 245fa Pool Boiling Heat Transfer
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4027966
dc.journal.fristpage101502
dc.journal.lastpage101502
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2014:;volume( 136 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record