Show simple item record

dc.contributor.authorKerr, Matthew
dc.contributor.authorPrime , Michael B.
dc.contributor.authorSwenson, Hunter
dc.contributor.authorBuechler, Miles A.
dc.contributor.authorSteinzig, Michael
dc.contributor.authorClausen , Bjorn
dc.contributor.authorSisneros, Thomas
dc.date.accessioned2017-05-09T01:02:21Z
dc.date.available2017-05-09T01:02:21Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_4_041205.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153060
dc.description.abstractTimeofflight neutron diffraction, contour method, and surface hole drilling residual stress measurements were conducted at Los Alamos National Lab (LANL) on a lab sized plate specimen (P4) from phase 1 of the joint U.S. Nuclear Regulatory Commission and Electric Power Research Institute Weld Residual Stress (NRC/EPRI WRS) program. The specimen was fabricated from a 304L stainless steel plate containing a seven pass alloy 82 groove weld, restrained during welding and removed from the restraint for residual stress characterization. This paper presents neutron diffraction and contour method results, and compares these experimental stress measurements to a WRS finite element (FE) model. Finally, details are provided on the procedure used to calculate the residual stress distribution in the restrained or as welded condition in order to allow comparison to other residual stress data collected as part of phase 1 of the WRS program.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Characterization in a Dissimilar Metal Weld Nuclear Reactor Piping System Mock Up
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024446
dc.journal.fristpage41205
dc.journal.lastpage41205
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record