Residual Stress Characterization in a Dissimilar Metal Weld Nuclear Reactor Piping System Mock Up
View/ Open
Date
2013Author
Kerr, Matthew
Prime , Michael B.
Swenson, Hunter
Buechler, Miles A.
Steinzig, Michael
Clausen , Bjorn
Sisneros, Thomas
Metadata
Show full item recordAbstract
Timeofflight neutron diffraction, contour method, and surface hole drilling residual stress measurements were conducted at Los Alamos National Lab (LANL) on a lab sized plate specimen (P4) from phase 1 of the joint U.S. Nuclear Regulatory Commission and Electric Power Research Institute Weld Residual Stress (NRC/EPRI WRS) program. The specimen was fabricated from a 304L stainless steel plate containing a seven pass alloy 82 groove weld, restrained during welding and removed from the restraint for residual stress characterization. This paper presents neutron diffraction and contour method results, and compares these experimental stress measurements to a WRS finite element (FE) model. Finally, details are provided on the procedure used to calculate the residual stress distribution in the restrained or as welded condition in order to allow comparison to other residual stress data collected as part of phase 1 of the WRS program.