• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    A Light Transmission Based Liquid Crystal Thermography System

    Thumbnail
    View/Open
    JHTRAO-27830#014503_1.pdf (375.5Kb)
    Date
    2008
    Author
    Timothy B. Roth
    Ann M. Anderson
    Metadata
    Show full item record
    Abstract
    This paper presents results from a study aimed at developing a novel thermochromic liquid crystal (TLC) temperature measurement system that uses light transmission instead of light reflection to measure surface temperature fields. In previous work, we reported on the effect of temperature on light transmission through TLCs as measured with a spectrophotometer [, and , 2005, “ Light Transmission Characteristics of Thermochromic Liquid Crystals,” Proceedings of IMECE2005, Orlando, FL, Paper No. IMECE2005-81812;, and , 2007, “ The Effects of Film Thickness, Light Polarization and Light Intensity on the Light Transmission Characteristics of Thermochromic Liquid Crystals,” ASME J. Heat Transfer, 129(3), pp. 372–378]. Here we report on results obtained using a charge coupled device (CCD) camera and polychromatic light setup that is similar to the type of equipment used in TLC reflection thermography. We tested three different light sources, a white electroluminescent light, a green electroluminescent light, and a halogen fiber optic light, using both direct and remote lighting techniques. We found that the green signal (as detected by the CCD camera) of the green electroluminescent light makes the best temperature sensor, because under remote lighting conditions it showed a 500% linear signal increase as the temperature of the R25C10W TLCs was raised from 30°to48°C. We further found that the angle of the CCD camera relative to the light did not significantly affect the results for angles up to 10deg for remote lighting and 15deg for direct lighting. The effect of light intensity variation was not significant for intensities up to 40% of the original level when normalized on the intensity at 19°C (a temperature outside the active range of the TLCs). The use of light transmission results in a larger range of temperature over which the TLCs can be calibrated and offers opportunities for more uniform lighting conditions, which may help overcome some of the problems associated with light reflection.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/138635
    Collections
    • Journal of Heat Transfer

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV