• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Hydraulic Testing of Ordnance Components

    Thumbnail
    View/Open
    JPVTAS-28467#162_1.pdf (1.202Mb)
    Date
    2006
    Author
    Tony D. Andrews
    Fred E. Brine
    Metadata
    Show full item record
    Abstract
    This paper describes a range of hydraulic fatigue and pressure tests carried out on gun barrels and ordnance components in support of weapons research and development programs. Cyclic testing of representative sections of large caliber guns has been routinely carried out to determine safe fatigue life for operational use. Ultrasonic techniques have been developed for mapping multiple cracks within the gun barrels by which periodic examinations of barrels during testing have been used to build up histories of crack initiation and growth. In relatively unworn barrels multiple cracks, initiated along each rifling groove, are shown to form in an extremely stable array that can grow to several millimeters depth, in agreement with calculated stress intensity factors, before one crack accelerates to dominate final failure. The development of localized erosion from extensive firing is shown to significantly affect the subsequent hydraulic fatigue cycling by generation of only one or two cracks as well as the prior removal of heavily prestressed bore material. Tests on fume extractor sections of barrels show that cracking initiates in the jet holes and only grows to the bore at late stages. Introduction of different levels of autofrettage acts to bias the radial location of the cracks. An extensive experimental program of work has been carried out in support of design studies on mid-wall cooled gun barrels exploring a number of different configurations for construction of compound tubes and the results of numerical simulations of the assembly process have been compared with strain gauge measurements during the experimental procedure on scale tubes. Subsequent hydraulic cycling was used to determine the fatigue implications of the processing route.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/134520
    Collections
    • Journal of Pressure Vessel Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV