Show simple item record

dc.contributor.authorKenji Kawashima
dc.contributor.authorResearch Associate
dc.contributor.authorToshiharu Kagawa
dc.contributor.authorToshinori Fujita
dc.contributor.authorResearch Associate
dc.date.accessioned2017-05-09T00:02:09Z
dc.date.available2017-05-09T00:02:09Z
dc.date.copyrightMarch, 2000
dc.date.issued2000
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26262#174_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123510
dc.description.abstractIn this paper, a chamber called an “Isothermal Chamber” was developed. The isothermal chamber can almost realize isothermal condition due to larger heat transfer area and heat transfer coefficient by stuffing steel wool in it. Using this chamber, a simple method to measure flow rates of ideal gases was developed. As the process during charge or discharge is almost isothermal, instantaneous flow rates charged into or discharged from the chamber can be obtained measuring only pressure in the chamber. The steady and the unsteady flow rate of air were measured by the proposed method, and the effectiveness of the method was demonstrated. [S0022-0434(00)00301-4]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInstantaneous Flow Rate Measurement of Ideal Gases
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.482439
dc.journal.fristpage174
dc.journal.lastpage178
dc.identifier.eissn1528-9028
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsGases AND Steel
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2000:;volume( 122 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record