• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Prediction of Fracture Toughness KIC Transition Curves of Pressure Vessel Steels From Charpy V-Notch Impact Test Results

    Thumbnail
    View/Open
    JPVTAS-28355#353_1.pdf (564.7Kb)
    Date
    1994
    Author
    T. Iwadate
    Y. Tanaka
    H. Takemata
    Metadata
    Show full item record
    Abstract
    A single and generalized prediction method of fracture toughness K IC transition curves of pressure vessel steels has been greatly desired by engineers in the petro-chemical and nuclear power industries, especially from the viewpoint of life extension of reactor pressure vessels. In this paper, the toughness degradation of Cr-Mo steels during long-term service was examined and the two prediction methods of fracture toughness K IC transition curves were studied using the data of 54 heats. 1) The toughness degradation of 2 1/4Cr-1Mo steels levels off within around 50,000 h service. 2) The FATT versus J -factor (=(Si+Mn)(P+Sn)×104 ) and/or X (=(10P+5Sb+4Sn+As)x10−2 ) relationships to estimate the maximum embrittlement of Cr-Mo steels were obtained. 3) A master curve method developed by authors et al.; that is, the method using a KIC /KIC−US versus excess temperature master curve of each material was presented for 2 1/4Cr-1Mo, 1 1/4Cr-1/2Mo, 1Cr and 1/2Mo chemical pressure vessel steels and ASTM A508 C1.1, A508 C1.2, A508 C1.3 and A533 Gr.B C1.1 nuclear pressure vessel steels, where KIC−US is the upper-shelf fracture toughness and excess temperature is test temperature minus FATT. 4) A generalized prediction method to predict the KIC transition curves of any low-alloy steels was developed. This method consists of KIC /KIC−US versus T–T0 master curve and temperature shift ΔT between fracture toughness and CVN impact transition curves versus yield strength relationship, where To is the temperature showing 50 percent KIC−US of the material. 5) The K IC transition curves predicted using both methods showed a good agreement with the lower bound of measured K JC values obtained from J C tests.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/114217
    Collections
    • Journal of Pressure Vessel Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV