Show simple item record

dc.contributor.authorX. Mao
dc.contributor.authorH. Takahashi
dc.contributor.authorT. Kodaira
dc.date.accessioned2017-05-08T23:38:35Z
dc.date.available2017-05-08T23:38:35Z
dc.date.copyrightApril, 1992
dc.date.issued1992
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26950#168_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/110336
dc.description.abstractThe procedure of the determination of yield and ultimate strengths of irradiated 2 1/4 Cr-1 M0 steel using small punch specimen (10 mm by 10 mm by 0.5 mm) has been demonstrated. The result was compared with the result obtained from conventional tensile test. Fracture toughness of irradiated 2 1/4 Cr-1 M0 steel was measured by use of subsized CT specimen and D. C. electrical potential method. Owing to irradiation hardening of 2 1/4 Cr-1 M0 steel, yield and ultimate strength increase substantially and fracture toughness decreases 37 percent when the steel is irradiated to a fluence of 3.2 x 1023 n/m2 . The small punch and subsized CT specimen can be used for irradiation test so that considerable irradiation space will be saved.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUse of Subsized Specimen for Evaluating the Strength and Fracture Toughness of Irradiated 2 1/4 Cr-1 M0 Steel
dc.typeJournal Paper
dc.journal.volume114
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904157
dc.journal.fristpage168
dc.journal.lastpage171
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsFracture toughness
dc.keywordsIrradiation (Radiation exposure)
dc.keywordsHardening
dc.keywordsFluence (Radiation measurement)
dc.keywordsTensile strength AND Electric potential
dc.treeJournal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record