• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Processing and Characterization of Multi-Layered Wear-Resistant Ceramic Coatings

    Thumbnail
    View/Open
    JEMTA8-26934#164_1.pdf (4.306Mb)
    Date
    1990
    Author
    A. K. Murthy
    S. D. Brown
    K. Komvopoulos
    Metadata
    Show full item record
    Abstract
    A new concept of a multi-layered ceramic coating consisting of a porcelain enamel bond interlayer with thermal expansion characteristics tailored to match those of a cast iron substrate and a plasma-sprayed wear-resistant surface layer of chromium oxide, chromium carbide, or partially stabilized zirconia was investigated. Flat substrates of grit-blasted and surface-treated cast iron were slurry sprayed with a finely ground glass frit mixed with isopropyl alcohol and water. Subsequently, the specimens were dried in an oven before firing at 1023 K to produce a smooth, dense, and strongly adherent enamel coating 75 to 100 μm thick. Wear-resistant coatings of oxides and carbides with varying particle sizes and powder densities were then thermally sprayed, by means of a plasma spray gun, at controlled power ratings and gas flow rates. The produced ceramic coatings were subsequently ground to a thickness of about 120 μm. Adherence testing by the tensile pull-off technique revealed high interfacial strength between the enamel coating and the substrate resulting from enhanced chemical interdiffusion and mechanical interlocking. Unlubricated sliding wear experiments using a ball-on-flat tribotester and tungsten carbide balls as sliders demonstrated low initial and moderately high steady-state friction coefficients. Optical and scanning electron microscopy and surface profilometry of the tested ceramic-coated specimens verified that surface damage and wear rate were negligibly small. The important role of the main process parameters on the interfacial adherence and uniformity of the enamel and ceramic layers and the potentiality of the developed processes in the deposition of relatively low-friction and wear-resistant multi-layered thick ceramic coatings are discussed in the context of the obtained results.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/107010
    Collections
    • Journal of Engineering Materials and Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV