Show simple item record

dc.contributor.authorM. O. Lai
dc.contributor.authorA. Y. C. Nee
dc.date.accessioned2017-05-08T23:30:12Z
dc.date.available2017-05-08T23:30:12Z
dc.date.copyrightJanuary, 1989
dc.date.issued1989
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26927#71_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/105522
dc.description.abstractThis investigation examines the effects of different finishing processes on the fatigue life of premachined holes in Assab 760 steel plates. The finishing processes studied were reaming, ballizing, and emery polishing. A general decrease in fatigue life with increase in surface roughness is observed for all the processes employed. In comparing the different processes, for a constant surface roughness, polishing is generally found to give the longest fatigue life while ballizing, in spite of the greater compressive residual stresses induced on the surface of the finished hole, the shortest. The surprising phenomenon was found to be attributed to the amount of plastic deformation occurred before fatigue loading. For Assab 760 steel, a prestrain in the radial direction of less than about 2.5 percent appeared to reduce the fatigue resistance of the material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Several Finishing Processes on the Fatigue Resistance of Hole Surfaces
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3226435
dc.journal.fristpage71
dc.journal.lastpage73
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsElectrical resistance
dc.keywordsFinishing
dc.keywordsFatigue life
dc.keywordsSurface roughness
dc.keywordsPolishing
dc.keywordsSteel
dc.keywordsResidual stresses
dc.keywordsPlates (structures) AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1989:;volume( 111 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record