| contributor author | E. G. Thomsen | |
| date accessioned | 2017-05-08T23:15:40Z | |
| date available | 2017-05-08T23:15:40Z | |
| date copyright | July, 1983 | |
| date issued | 1983 | |
| identifier issn | 0094-4289 | |
| identifier other | JEMTA8-26893#178_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/97175 | |
| description abstract | Tough-pitch copper was drawn and extruded in multi-pass operations to effective strains of 1.53 or area reductions of 80 percent. It appears that residual stresses and mean pressure did not influence the behavior of the deformed materials as interpreted from tension and compression tests. It is suggested that the behavior of tough-pitch copper after deformation is similar to that observed by metallurgists in endurance tests and strongly indicates simultaneous strengthening and softening, through the combined process of dislocation strengthening (by multiplication, pinning and interaction) and softening by recovery. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Stress-Strain Properties of Tough-Pitch Copper After Multi-Pass Drawing and Extruding | |
| type | Journal Paper | |
| journal volume | 105 | |
| journal issue | 3 | |
| journal title | Journal of Engineering Materials and Technology | |
| identifier doi | 10.1115/1.3225640 | |
| journal fristpage | 178 | |
| journal lastpage | 181 | |
| identifier eissn | 1528-8889 | |
| keywords | Copper | |
| keywords | Extruding | |
| keywords | Stress | |
| keywords | Toughness | |
| keywords | Compression | |
| keywords | Dislocations | |
| keywords | Tension | |
| keywords | Residual stresses | |
| keywords | Pressure AND Deformation | |
| tree | Journal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 003 | |
| contenttype | Fulltext | |
