Show simple item record

contributor authorH. Heshmat
contributor authorW. Shapiro
contributor authorS. Gray
date accessioned2017-05-08T23:14:28Z
date available2017-05-08T23:14:28Z
date copyrightApril, 1982
date issued1982
identifier issn0742-4787
identifier otherJOTRE9-28650#149_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/96479
description abstractThis paper describes the development of two types of air-lubricated foil journal bearings, designed for separate purposes; stability and load capacity. The first was a three-pad configuration, with each pad forming a wedge whose convergence increases with operating speed (of 120,000 rpm max.). The net result is a highly stable bearing at high operating speed. The second was a single pad journal bearing (43.7 mm diameter × 34.9 mm long) that produced a load capacity of 352 KPa (51 psi) at an operating speed of 68,000 rpm.
publisherThe American Society of Mechanical Engineers (ASME)
titleDevelopment of Foil Journal Bearings for High Load Capacity and High Speed Whirl Stability
typeJournal Paper
journal volume104
journal issue2
journal titleJournal of Tribology
identifier doi10.1115/1.3253173
journal fristpage149
journal lastpage156
identifier eissn1528-8897
keywordsStability
keywordsStress
keywordsWhirls
keywordsJournal bearings
keywordsBearings AND Wedges
treeJournal of Tribology:;1982:;volume( 104 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record