Show simple item record

contributor authorR. T. Yen
contributor authorL. Foppiano
date accessioned2017-05-08T23:10:41Z
date available2017-05-08T23:10:41Z
date copyrightFebruary, 1981
date issued1981
identifier issn0148-0731
identifier otherJBENDY-25673#38_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/94313
description abstractThe distensibility of pulmonary veins of cats, in the diametric range of 100–1200 μm, was studied as a function of the venous pressure pv and pleural pressure pPL , while the alveolar air pressure was maintained at zero (atmospheric). The resulting percentage changes in diameter normalized with respect to the diameter at ΔP of 10 cm H2 O (D10 ) are expressed as function of ΔP = pv − pPL . It was found that in most cases the diameter varies linearly with ΔP: D/D10 = 1 + α(pv − pPL) where α is the compliance coefficient. The results show that smaller veins of the cat are more compliant than larger veins. For example, when pleural pressure is −10 cm H2 O, the values of α for vessels in the ranges of diameters of 100–200 μm, 200–400 μm, 400–800 μm and 800–1200 μm are, respectively, 2.05, 1.44, 1.08 and 0.71 percent per cm H2 O or Pa−1 . The effects of lung inflation on the distensibility of pulmonary veins are also studied. Our results show that for vessel sizes in the range of 400–800 μm and 800–1200 μm the compliance constant α is not affected by inflation of the lungs (changes in pleural pressure to more negative values). For smaller veins in the size ranges 100–200 μm and 200–400 μm our results show an increase in compliance from 2.05 to 2.79 and from 1.44 to 2.01 percent per cm H2 O or Pa−1 , respectively, when pleural pressure is changed from −10 to −15 cm H2 O. When the pleural pressure is more negative than −15 cm H2 O, however, the compliance of the vessels in the foregoing two size ranges is observed to decrease.
publisherThe American Society of Mechanical Engineers (ASME)
titleElasticity of Small Pulmonary Veins in the Cat
typeJournal Paper
journal volume103
journal issue1
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.3138243
journal fristpage38
journal lastpage42
identifier eissn1528-8951
keywordsPressure
keywordsElasticity
keywordsInflationary universe
keywordsLung AND Vessels
treeJournal of Biomechanical Engineering:;1981:;volume( 103 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record