| contributor author | L. H. Sobel | |
| contributor author | S. Z. Newman | |
| date accessioned | 2017-05-08T23:09:41Z | |
| date available | 2017-05-08T23:09:41Z | |
| date copyright | November, 1980 | |
| date issued | 1980 | |
| identifier issn | 0094-9930 | |
| identifier other | JPVTAS-28192#400_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/93767 | |
| description abstract | Predictions obtained from a simplified finite element analysis are compared with experimental results on the plastic in-plane bending and buckling of a 16-in-dia Type 304 stainless steel piping structure which consists of a 90-deg elbow and two straight tangent pipes. The large displacement analysis is based on the widely used MARC pipe-bend element 17, and on a stress-strain curve obtained from coupon specimens taken from the tested elbow. The simplified analysis predictions are found to be in reasonably good agreement with the experimental results. The analysis underestimates the experimental buckling load by 10 percent and overestimates the deformation at a given load, particularly at the higher load levels. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Comparison of Experimental and Simplified Analytical Results for the In-Plane Plastic Bending and Buckling of an Elbow | |
| type | Journal Paper | |
| journal volume | 102 | |
| journal issue | 4 | |
| journal title | Journal of Pressure Vessel Technology | |
| identifier doi | 10.1115/1.3263351 | |
| journal fristpage | 400 | |
| journal lastpage | 409 | |
| identifier eissn | 1528-8978 | |
| keywords | Buckling | |
| keywords | Stress | |
| keywords | Pipes | |
| keywords | Deformation | |
| keywords | Stress-strain curves | |
| keywords | Finite element analysis | |
| keywords | Displacement | |
| keywords | Stainless steel AND Pipe bends | |
| tree | Journal of Pressure Vessel Technology:;1980:;volume( 102 ):;issue: 004 | |
| contenttype | Fulltext | |
