Show simple item record

contributor authorR. D. Flack
contributor authorM. E. Leader
contributor authorE. J. Gunter
date accessioned2017-05-08T23:09:26Z
date available2017-05-08T23:09:26Z
date copyrightOctober, 1980
date issued1980
identifier issn1050-0472
identifier otherJMDEDB-27981#842_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/93645
description abstractThe response of a flexible rotor mounted in six bearing sets has been experimentally determined. One set of axial groove bearings and five sets of pressure dam bearings were tested. Conventional synchronous tracking was used in the analysis and other techniques utilizing an FFT analyzer were developed. The stability of the system was seen to strongly depend on the design of the step bearings. The dam bearings were also noted to lock into subsynchronous whip during deceleration after the system went unstable. The response of the system with varying degrees of unbalance is also analyzed and several structural resonances of the rotor system are discussed.
publisherThe American Society of Mechanical Engineers (ASME)
titleAn Experimental Investigation on the Response of a Flexible Rotor Mounted in Pressure Dam Bearings
typeJournal Paper
journal volume102
journal issue4
journal titleJournal of Mechanical Design
identifier doi10.1115/1.3254831
journal fristpage842
journal lastpage850
identifier eissn1528-9001
keywordsPressure
keywordsDams
keywordsBearings
keywordsRotors
keywordsDesign
keywordsLocks (Waterways) AND Stability
treeJournal of Mechanical Design:;1980:;volume( 102 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record