Show simple item record

contributor authorS. R. Goldstein
contributor authorJ. J. Sipe
contributor authorJ. L. Doppman
contributor authorJ. W. Boretos
contributor authorR. E. Jones
date accessioned2017-05-08T23:08:13Z
date available2017-05-08T23:08:13Z
date copyrightAugust, 1980
date issued1980
identifier issn0148-0731
identifier otherJBENDY-25658#221_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/93020
description abstractA miniature catheter suitable for clinical use based on the principle of the continuously everting tube has been developed and tested extensively in dogs. The 1-mm-dia flexible tube can advance up a narrow tortuous blood vessel 30 cm beyond the tip of the conventional catheter to which it is attached. A slippery hydromer coating combined with a U-shaped cross section enables the tube eversion to be accomplished at an acceptable operating pressure. The new system will provide access to previously inaccessible regions of the body, and has the potential for clinical use in embolizing selected vessels, providing highly localized chemotherapy, and sampling body fluids. The catheter can advance both with and against the blood flow in arteries and veins, and is awaiting clinical trials.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Miniature Toposcopic Catheter Suitable for Small Diameter Tortuous Blood Vessels
typeJournal Paper
journal volume102
journal issue3
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.3149577
journal fristpage221
journal lastpage229
identifier eissn1528-8951
keywordsBlood vessels
keywordsCatheters
keywordsVessels
keywordsBlood flow
keywordsPressure
keywordsFluids
keywordsCoating processes
keywordsCoatings AND Sampling (Acoustical engineering)
treeJournal of Biomechanical Engineering:;1980:;volume( 102 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record