Show simple item record

contributor authorL. E. Murch
contributor authorC. Poli
date accessioned2017-05-08T23:03:26Z
date available2017-05-08T23:03:26Z
date copyrightMay, 1977
date issued1977
identifier issn1087-1357
identifier otherJMSEFK-27659#308_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/90225
description abstractThe procedure used to obtain the general design data of various orienting devices for vibratory-bowl feeders and the general performance characteristics for vibratory-bowl feeding systems are described for the case of an edge-riser orienting device and a feeding system used for feeding and orienting rectangular prisms. The results of the testing and analysis are summarized on data sheets similar to those contained in a handbook of feeding and orienting techniques for small parts currently being assembled at the University of Massachusetts.
publisherThe American Society of Mechanical Engineers (ASME)
titleAnalysis of Feeding and Orienting Systems for Automatic Assembly—Part 2: Vibratory-Bowl Feeding Systems
typeJournal Paper
journal volume99
journal issue2
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3439213
journal fristpage308
journal lastpage313
identifier eissn1528-8935
keywordsManufacturing
keywordsPrisms (Optics)
keywordsDesign
keywordsTesting
keywordsPipeline risers AND Performance characterization
treeJournal of Manufacturing Science and Engineering:;1977:;volume( 099 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record