Show simple item record

contributor authorV. K. Ausherman
contributor authorH. S. Nagaraj
contributor authorD. M. Sanborn
contributor authorW. O. Winer
date accessioned2017-05-08T23:01:56Z
date available2017-05-08T23:01:56Z
date copyrightApril, 1976
date issued1976
identifier issn0742-4787
identifier otherJOTRE9-28597#236_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/89330
description abstractAn improved technique for the measurement of temperature distributions in an EHD conjunction is presented. The technique reported here employs the infrared radiation emitted by the EHD conjunction and appears more rigorous, more reliable, and less cumbersome than that reported previously by the authors. Detailed mapping of fluid temperature (averaged through the thickness) and the ball surface temperature can be obtained. These temperature distributions have been reported for a naphthenic mineral oil for peak Hertz pressures of 1.05 and 1.51 GN/m2 (148 and 219 kpsi), at sliding speeds ranging from 0.35 to 12.7 m/s (13.4 to 500 ips) and a bath temperature of 40°C.
publisherThe American Society of Mechanical Engineers (ASME)
titleInfrared Temperature Mapping in Elastohydrodynamic Lubrication
typeJournal Paper
journal volume98
journal issue2
journal titleJournal of Tribology
identifier doi10.1115/1.3452806
journal fristpage236
journal lastpage242
identifier eissn1528-8897
keywordsTemperature
keywordsElastohydrodynamic lubrication
keywordsElectrohydrodynamics
keywordsIntrusion prevention systems
keywordsTemperature distribution
keywordsThickness
keywordsMineral oil
keywordsInfrared radiation
keywordsFluids AND Temperature measurement
treeJournal of Tribology:;1976:;volume( 098 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record