Show simple item record

contributor authorA. F. Seybert
contributor authorM. J. Crocker
date accessioned2017-05-08T22:59:06Z
date available2017-05-08T22:59:06Z
date copyrightNovember, 1975
date issued1975
identifier issn1087-1357
identifier otherJMSEFK-27631#1227_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/87751
description abstractA technique is presented in which the effects on noise of changing diesel engine operating parameters can be predicted. Traditionally, the effects have been determined by experiment. The technique presented in this paper utilizes experimentally determined frequency response functions between each cylinder pressure input and the engine noise. Once the frequency responses are measured, the engine noise can be calculated for an arbitrary cylinder pressure input. The effect of injection timing, engine load, and engine speed are predicted using cylinder pressure histories obtained from a single cylinder research engine. Experimental results are presented, showing good agreement with predicted data. It has been found that the measured frequency responses are independent of the cylinder pressure level. Also presented here is the multiple coherence between the cylinder pressures and the engine noise and the ordinary coherence between two typical cylinder pressures.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Use of Coherence Techniques to Predict the Effect of Engine Operating Parameters on Diesel Engine Noise
typeJournal Paper
journal volume97
journal issue4
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3438733
journal fristpage1227
journal lastpage1233
identifier eissn1528-8935
keywordsEngines
keywordsNoise (Sound)
keywordsDiesel engines
keywordsCylinders
keywordsPressure
keywordsFrequency response
keywordsFunctions AND Stress
treeJournal of Manufacturing Science and Engineering:;1975:;volume( 097 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record